Document 871-1
Shielded Power Inductors
–
XAL7020
•ꢀHighꢀcurrentꢀandꢀveryꢀlowꢀDCR
•ꢀ SoftꢀsaturationꢀmakesꢀthemꢀidealꢀforꢀVRM/VRDꢀapplications.
Designer’s Kit C45± contains 3 of each value..
Core material Composite
Environment RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Weight 0.83 g
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +165°C with derated current.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel; 2000/13″ reel Plastic tape: 16 mm wide,
0.30 mm thick, 12 mm pocket spacing, 2.2 mm pocket depth
PCB washing Only pure water or alcohol recommended
DCR (mOhms)3
Irms
(A)
6
Inductance2
±±20 (µH)
SRF typ4
(MHz)
Isat5
(A)
Part number1
typ
max
±2°C rise 42°C rise
Irms Testing
XAL7020-151ME_
XAL7020-271ME_
XAL7020-331ME_
XAL7020-471ME_
XAL7020-681ME_
0.15
0.27
0.33
0.47
0.68
1.9
2.9
4.0
5.3
7.9
2.5
3.8
5.2
6.4
9.5
161
112
88
72
54
46.0
30.0
28.0
24.3
22.3
18
15
14
12
10
24
21
20
17
13
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
XAL7020-102ME_
XAL7020-122ME_
XAL7020-152ME_
XAL7020-222ME_
1.0
1.2
1.5
2.2
9.8
11.5
16.7
24.4
10.8
12.8
18.6
27.5
46
42
37
29
16.4
14.5
11.7
11.2
8.0
11
10
9.0
7.0
7.0
6.0
5.0
1. When ordering, please specify packaging code:
XAL72±2-±±±MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(2000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% (typ) from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 871-1 Revised 07/25/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.