Document 891-1
Shielded Power Inductors XAL1580
• High current – up to 111 A; Very low DCR – 0.50 mOhms
• AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
• Soft saturation makes them ideal for VRM/VRD applications.
Core material Composite
Core and winding loss Go to online calculator
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight 10.6 g
Ambient temperature –40°C to +90°C with (40°C rise) Irms current.
Maximum part temperature +130°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +130°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 300/13″ reel Plastic tape: 32 mm wide, 0.3 mm thick,
24 mm pocket spacing, 8.5 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (µH)
SRF typ4
(MHz)
Isat5
(A)
Part number1
typ
max
Irms Testing
XAL1580-401ME_
XAL1580-741ME_
XAL1580-102ME_
XAL1580-132ME_
XAL1580-182ME_
XAL1580-202ME_
XAL1580-302ME_
XAL1580-452ME_
XAL1580-532ME_
XAL1580-612ME_
0.40
0.74
1.0
1.3
1.8
2.0
3.0
4.5
5.3
6.1
0.50
0.72
0.93
1.15
1.61
1.91
2.62
3.82
4.35
5.66
0.70
0.86
1.12
1.38
1.93
2.29
3.10
4.58
5.22
6.79
53.0
35.1
30.0
26.2
21.3
20.1
16.0
12.5
11.8
11.7
111
47.0
43.2
40.6
34.6
33.2
29.5
25.6
20.4
19.5
16.9
60.0
59.7
57.5
46.7
43.8
39.9
34.4
27.0
26.5
22.6
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
86.0
73.5
65.0
57.0
51.0
43.0
34.2
33.0
31.0
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
1. When ordering, please specify termination and packaging codes:
XAL1582-61±MED
Termination: E= RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: D= 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel).
B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 891-1 Revised 12/08/15