Document 962-1
Shielded Power Inductors
–
XAL1030
•ꢀVery high current and low DCR
•ꢀLow profile, only 3 mm high
•ꢀSoft saturation makes them ideal for VRM/VRD applications.
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper. Other termina-
tions available at additional cost.
Weight 1.6 – 1.8 g
Ambient temperature –40°C to +125°C with Irms current, +125°C to
+165°C with derated current.
Storage temperature Component: –40°C to +130°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 250/7″reel; 1000/13″ reel Plastic tape: 24 mm wide,
0.3 mm thick, 16 mm pocket spacing, 3.25 mm pocket depth
PCB washing Only pure water or alcohol recommended
DCR (mOhms)3
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (µH)
SRF typ4
(MHz)
Isat
Part number1
typ
max
(A)5
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
XAL1030-161ME_
XAL1030-301ME_
XAL1030-561ME_
XAL1030-102ME_
0.16
0.30
0.56
1.0
1.10
1.55
2.50
4.50
1.21
1.70
2.75
4.95
120
78
53
88.0
68.0
44.0
35.0
28.0
25.5
23.0
16.0
42.0
35.0
32.0
23.0
41
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
1. When ordering, please specify packaging code:
XAL1232-12±MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
Factory order only, not stocked.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% (typ) amount from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
These parts are preproduction products for electrical evaluation only.
Document 962-1 Revised 07/25/12
US +1-847-639-6400 sales@coilcraft.com
Specification subject to change without notice.
UK +44-1236-730595 sales@coilcraft-europe.com
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg