Document 812-1
Shielded Power Inductors
–
XAL1060
•ꢀExcellent current handling – over 100 A
•ꢀVery low DCR – as low as 0.5 mOhm
•ꢀSoft saturation
Designer’s Kit C435 contains 3 of each XAL1060 and XAL1010 value
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Weight 3.6 – 3.8 g
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +165°C with derated current.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 150/7″reel; 600/13″ reel Plastic tape: 24 mm wide,
0.3 mm thick, 16 mm pocket spacing, 6.3 mm pocket depth
PCB washing Only pure water or alcohol recommended
DCR (mOhms)3
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
SRF typ4
(Mµz)
Isat5
(A)
Part number1
typ
max
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
XAL1060-181ME_
XAL1060-401ME_
XAL1060-681ME_
XAL1060-122ME_
XAL1060-152ME_
0.18
0.40
0.68
1.2
0.50
0.80
1.35
2.50
3.00
0.55
0.88
1.50
2.75
3.30
68
60
51
44
36
>100
82
52
43
36
28.8
25.9
22.4
17.9
16.0
46.0
36.8
33.9
26.3
24.4
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other
components. Therefore temper-
ature rise should be verified in
application conditions.
1.5
XAL1060-222ME_
XAL1060-332ME_
XAL1060-472ME_
2.2
3.3
4.7
4.50
7.20
9.75
4.95
7.92
10.72
25
19
16
32
26
25
13.9
11.2
8.5
20.0
16.8
14.0
1. When ordering, please specify packaging code:
XAL1262-15±MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(750 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% (typ) from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 812-1 Revised 07/25/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.