Incremental encoders
EX approval ATEX EEx d IIC T4
Resolution 5...5000 pulses
X 700 - incremental
Features
– Encoder incremental / ATEX
– Optical sensing
– Resolution max. 5000 ppr
– Clamping flange / shaft ø10 mm
– Explosion-proof in line with EEx d IIC T4
– Area of application: EX I/II 2 GD / ATEX 133213X
– Material stainless steel
X 700 with EX-proof housing
Technical data - electrical ratings
Technical data - mechanical design
Voltage supply
4.75...30 VDC
Housing
Shaft
ø70 mm
Reverse polarity protection Yes
ø10 mm (clamping flange)
Clamping flange
Consumption w/o load
Resolution (steps/turn)
Reference signal
Sensing method
≤50 mA
Flange
5...5000
Protection DIN EN 60529 IP 67
Zero pulse, width 90°
Optical
Operating speed
Starting torque
≤6000 rpm
≤0.04 Nm
Output frequency
Output signals
≤300 kHz
Admitted shaft load
≤60 N axial
≤50 N radial
A 90° B, N + inverted
Push-pull short-circuit proof
DIN EN 61000-6-2
DIN EN 61000-6-4
Materials
Housing: stainless steel
Flange: stainless steel
Output circuit
Interference immunity
Emitted interference
Operating temperature
Relative humidity
Resistance
-25...+70 °C
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 12-2000 Hz
DIN EN 60068-2-27
Shock 100 g, 6 ms
Output signals
Weight approx.
E-connection
1300 g
Clockwise rotating direction when looking at flange.
Cable 2 m (other length upon
request)
Track A
Track A
Track B
Track B
90°
Zero pulse
Zero pulse
Optional: other reference impulse.
www.baumerivo.com
1