Approval sheet
Test Method
(AEC-Q200. IEC 60115)
Test Item
Specification
External Visual
AEC-Q200 TABLE 7.9
Inspect device construction, marking and
workmanship.
No visual damage and refer
the marking code
specification.
Within the specification..
Physical
AEC-Q200 TABLE 7.10
Verify physical dimensions to the applicable device
detail specification.
Dimension
Within product
specification tolerance
and no visible damage.
Mechanical Shock
Vibration
AEC-Q200 TABLE 7.13
Test Peak value:100g's,Wave:Hail-sine,
Duration:6ms,Velocity:12.3ft/sec.
0 mΩ : ≦0.2 mΩ
AEC-Q200 TABLE 7.14
5 g's for 20 min., 12 cycles each of 3 orientations.
Test from 10-2000 Hz.
Others: △R≦ ±1%
and no visual damage
0 mΩ : ≦0.2 mΩ
*Resistance
AEC-Q200 TABLE 7.15
Solder dipping @ 270℃±5℃ for 10sec.±1sec.
To Solder Heat
Others : ΔR≦ ±1%
No mechanical damage.
0 mΩ : ≦0.2 mΩ
Others :ΔR≦ ±1%
No mechanical damage.
Thermal Shock
ESD
AEC-Q200 TABLE 7.16
-55 to 155℃/ dwell time 15min/ Max transfer time
20sec/ 300cycles.
0 mΩ : ≦0.2 mΩ
AEC-Q200-002
Test contact min. 1KV.
Others: ΔR≦ ±1%
No mechanical damage.
Over 95% of termination
must be covered with
solder.
*Solder Ability
AEC-Q200 TABLE 7.18
a)Baking 155℃ 4H, dipping 235℃ 5s
b)Steam 8H, dipping 215℃ 5s
c)Steam 8H, dipping 260℃ 7s
IEC 60115-1, Clause 4.17 for General Type
After immersing flux, dip in the
245℃±2℃ molten solder bath for 3± 0.5sec
Refer UL-94.
Flammability
*Board Flex
AEC-Q200 TABLE 7.20
UL-94 V-0 or V-1 are acceptable
0 mΩ : ≦0.2 mΩ
AEC-Q200 TABLE 7.21
Bending 2mm for 60 seconds.
Others:ΔR≦ ±2%
No mechanical damage.
No cracking or no part
being sheared off from
its pad
Terminal strength
AEC-Q200-006
Pressurizing force: 1Kg, Test time: 60±1sec
Page 7 of 9
ASC_WW08S_J-WW08U_J_AUTO_V03
Mar - 2024