WR-K SERIES
Single, dual and triple output
• Low profile – 0.91 inch high
• Efficie ncie s to 84%
• UL approve d (Single outputs )
• 2:1 input range
• PCB or chas s is mounting
• Pi input filte r
• OVP on all outputs
WR-K Series devices are efficient, high power DC/DC converters with single,
dual and triple outputs supplying 50 to 60 Watts. Their low profile 3.5 x 5.5 x
0.91 inch package provides a power density of 3.4 Watts per cubic inch.
Efficiencies range from 78% to 84% . These converters feature unique dual
power stages utilising forward converters with MOSFET switching at 100kHz. A
Pi network input filter is also included. High efficiency is virtually constant down
to 30% output loading. Other features include output short circuit protection,
overvoltage protection, remote sensing of primary output, input surge protection
and remote on/off control. The 2:1 input voltage ranges are 9 to 18VDC, 18 to
36VDC and 36 to 72VDC. Typical applications for WR-K Series power supplies
include telecoms, distributed power systems and industrial automation.
[ 2 YEAR WARRANTY ]
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS CONTINUED
Voltage accuracy
±1.0%
±10%
Yes
Remote ON/OFF
Logic compatibility
Ec-ON
CMOS or open collector TTL
Voltage adjustability
Remote sense
Singles and duals, Note 7, 8
+5.5VDC min. or open-circuit
max. 1.8VDC
Ec-OFF
See Note 5, 6
Shutdown idle current
Input resistance
Control common
5mA
0VDC <Ein< 9VDC; 100kΩ
Referenced to input minus
Line regulation
HL-LL
Triples, –5V output
±0.5% , max.
±1% max.
GENERAL SPECIFICATIONS
Load regulation
Note 3, 11
FL-0.25% FL
±1.0% max
±2% max.
±5.0% max.
Efficiency
See table
Input/output
78% , min.
Dual output
Triples, –5V output
Isolation voltage
See Note 9
500VDC, min.
250VDC, min.
Input/case
Ripple and noise
5Hz to 20MHz
75mV pk-pk
10mV rms, max.
Switching frequency
Fixed
100kHz
UL478
Transient response
25% step load,
change
±1.0% error band
500µs recovery max.
Approvals and
standards
Safety
Temperature coefficient
±0.02% /°C, max.
Case material
Black coated aluminium with
non-conductive base
Overvoltage protection See Note 4
Short circuit protection All outputs
INPUT SPECIFICATIONS
OVP clamp on
all outputs
Weight
(without heatsink)
Single/dual
Triple
454g (16.03oz)
390g (13.77oz)
Continuous
automatic recovery
MTBF
See Note 10
840,000 hours
ENVIRONMENTAL SPECIFICATIONS
Input voltage range
12VDC
24VDC
48VDC
9 to 18VDC
18 to 36VDC
36 to 72VDC
Thermal performance
Operating ambient
Operating with
optional heatsink
–25°C to +55°C
–25°C to +71°C
Operating, case
Non-operating amb. -55°C to +105°C
Derating above
+85°C case
-25°C to +85°C
No load input current
Singles, duals at 12Vin
Triples at 12Vin
25mA
70mA
Singles, duals at 24 and 48Vin 20mA
Linearly to 0 Watts
at +100°C
Triples at 24 and 48Vin
45mA
Cooling
Free-air convection
cooled or conduction
Input filter
Pi network
Reverse voltage
protection
Note 12
Internal shunt diode
Use external fuse
Relative humidity
Altitude
Non-condensing
5% to 95% RH
Operating
Non operating
10,000 feet max.
40,000 feet max.
Surge protection
Transient clamp
Vibration, 5Hz to 500Hz Pressure
2.5G rms (approx.)
PAGE 1