WM8980
w
Stereo CODEC With Speaker Driver and Video Buffer
DESCRIPTION
FEATURES
Stereo CODEC:
The WM8980 is a low power, high quality stereo CODEC with
integrated video buffer designed for portable applications such
as multimedia phone, digital still camera or digital camcorder.
•
•
•
DAC SNR 98dB, THD -84dB (‘A’ weighted @ 48kHz)
ADC SNR 95dB, THD -80dB (‘A’ weighted @ 48kHz)
On-chip Headphone Driver with ‘capless’ option
The device integrates preamps for stereo differential mics, and
includes drivers for speakers, headphone and differential or
stereo line output. External component requirements are
reduced as no separate microphone or headphone amplifiers
are required.
-
40mW per channel into 16Ω / 3.3V SPKVDD
•
0.9W output power into 8Ω BTL speaker / 5V SPKVDD
-
-
Capable of driving piezo speakers
Stereo speaker drive configuration
Mic Preamps:
•
Stereo Differential or mono microphone Interfaces
An integrated video buffer is provided which has programmable
gain from 0-6dB (6-12dB unloaded), sync-tip clamp and a 3rd
order input low pass filter for signal re-construction.
-
-
-
Programmable preamp gain
Psuedo differential inputs with common mode rejection
Programmable ALC / Noise Gate in ADC path
Advanced on-chip digital signal processing includes a 5-band
•
Low-noise bias supplied for electret microphones
equaliser, a mixed signal Automatic Level Control for the Other Features:
microphone or line input through the ADC as well as a purely
digital limiter function for record or playback. Additional digital
filtering options are available in the ADC path, to cater for
application filtering such as ‘wind noise reduction’.
•
•
•
•
•
•
•
•
•
Integrated video buffer with LPF filter and clamp.
Enhanced 3-D function for improved stereo separation
Digital playback limiter
5-band Equaliser (record or playback)
Programmable ADC High Pass Filter (wind noise reduction)
Programmable ADC Notch Filter
Aux inputs for stereo analog input signals or ‘beep’
On-chip PLL supporting 12, 13, 19.2MHz and other clocks
Support for 8, 11.025, 12, 16, 22.05, 24, 32, 44.1 and
48kHz sample rates
The WM8980 digital audio interface can operate as a master or
a slave. An internal PLL can generate all required audio clocks
for the CODEC from common reference clock frequencies, such
as 12MHz and 13MHz.
The WM8980 operates at analogue supply voltages from 2.5V
to 3.3V, although the digital core can operate at voltages down
to 1.71V to save power. The speaker outputs and OUT3/4 line
outputs can run from a 5V supply if increased output power is
required. Individual sections of the chip can also be powered
down under software control.
•
•
Low power, low voltage
-
2.5V to 3.6V (digital: 1.71V to 3.6V)
6x6mm 40-lead QFN package
APPLICATIONS
•
•
Stereo Camcorder or DSC
Multimedia Phone
BLOCK DIAGRAM
Pre-Production, March 2007, Rev 3.1
WOLFSON MICROELECTRONICS plc
Copyright ©2007 Wolfson Microelectronics plc.
To receive regular email updates, sign up at http://www.wolfsonmicro.com/enews/