Preliminary W583XXX
HIGH FIDELITY PowerSpeech TM
GENERAL DESCRIPTION
W583xxx are fabricated using the Winbond CMOS process. The W583xxx family is a new member of
the PowerSpeech synthesizer series, with voice quality which is even better than before. The
W583xxx family has adopted the same architecture as the PowerSpeech synthesizers while
replacing the 4-bit ADPCM algorithm with Winbond′s new high fidelity voice synthesis algorithm to
produce better quality voice. W583xxx provides IR function, CPU interface, pad option for Ring or
Crystal oscillator and voice output in DAC current or PWM type.
According different voice duration, there are 11 bodies in W583xxx family, list them below.
PART NO.
Duration
W583S10
10 sec
W583S15
15 sec
W583S20
20 sec
W583S25
25 sec
W583S30
30 sec
W583S40
40 sec
PART NO.
Duration
W583S50
50 sec
W583S60
60 sec
W583S80
80 sec
W583S99
99 sec
W583M02
120 sec
Notes:
1. The voice duration is estimated by 6.4 KHz sampling rate.
2. W583S10 provides less I/O pins, and do not provide crystal oscillator.
FEATURES
• Programmable speech synthesizer
• New high fidelity synthesis algorithm
• Wide operating voltage range: 2.4 - 5.5 Volts
• Direct drive speaker by PWM output or Built-in 8-bit D/A converter
• Supports CPU interface operation
• IR interface for command Transmission and Receiving
• Symbolic compiler supported
• Instruction cycle ≤ 400 µS typically
• Section control
− Variable frequency: 4.8/6/8/12 KHz
− LED: ON/OFF
• Eight general-purpose registers R0-R7
• Pad option for Ring or Crystal oscillator1
• 8 trigger inputs - with separate control of falling/rising edge trigger2
• 8 STOP outputs3
• Number of interrupt vector / label up to 2,048
Notes:
1. W583S10 provide ring oscillator only.
2. Only 4 trigger pins in W583S10.
3. Only 5 STOP outputs in W583S10.
Publication Release Date: March 1999
Revision A1
- 1 -