Not Available for New Designs, Use GSIB1520, GSIB1540, GSIB1560, GSIB1580
VSIB1520, VSIB1540, VSIB1560, VSIB1580
www.vishay.com
Vishay General Semiconductor
Single-Phase Single In-Line Bridge Rectifiers
FEATURES
• UL recognition file number E54214
• Thin single in-line package
• Glass passivated chip junction
• High surge current capability
• High case dielectric strength of 2500 VRMS
~
~
• Solder dip 260 °C, 40 s
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
General purpose use in AC/DC bridge full wave rectification
for switching power supply, home appliances, office
equipment, industrial automation applications.
~
~
Case Style GSIB-5S
PRIMARY CHARACTERISTICS
MECHANICAL DATA
Package
GSIB-5S
15 A
Case: GSIB-5S
Epoxy meets UL 94 V-0 flammability rating
IF(AV)
VRRM
IFSM
200 V, 400 V, 600 V, 800 V
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix for consumer grade, meets JESD 201 class 1A
300 A
10 μA
IR
whisker test
VF at IF = 7.5 A
TJ max.
0.95 V
150 °C
In-Line
Polarity: As marked on body
Mounting Torque: 10 cm-kg (8.8 inches-lbs) max.
Recommended Torque: 5.7 cm-kg (5 inches-lbs)
Diode variations
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VSIB1520
VSIB1540
400
VSIB1560
600
VSIB1580
800
UNIT
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
200
V
V
V
VRMS
140
280
420
560
Maximum DC blocking voltage
VDC
200
400
600
800
TC = 107 °C (1)
TA = 25 °C (2)
15
Maximum average forward rectified
output current at
IF(AV)
A
3.5
Peak forward surge current single sine-wave
superimposed on rated load
IFSM
300
A
Rating for fusing (t < 8.3 ms)
I2t
240
A2s
°C
Operating junction and storage temperature range
TJ, TSTG
- 55 to + 150
Notes
(1)
Unit case mounted on aluminum plate heatsink
Units mounted on PCB without heatsink
(2)
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS SYMBOL VSIB1520
VSIB1540
VSIB1560
VSIB1580 UNIT
Maximum instantaneous forward voltage
drop per diode
7.5 A
VF
IR
0.95
V
TA = 25 °C
10
Maximum DC reverse current at rated DC
blocking voltage per diode
μA
TA = 125 °C
250
Revision: 26-Jun-13
Document Number: 84653
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000