VS-150-15 Metal Enclosed Switching Power Supply
•
Features
·AC input range selectable by switch
·Short circuit, overload, over-voltage
protected
·Cooling by free air convection
·100% full load burn-in test
·Fixed switching frequency at 25KHz
·2 year warranty
DC output voltage
Output V. tolerance
Output rated current
Output current range
Ripple & noise
15V
±1%
10A
0-10A
180mVp-p
±0.3%
±0.3%
150W
84%
Line regulation
Load regulation
DC output power
Efficiency
DC voltage adj.
13.5-16.5V (± 10% rated output voltage)
88~132VAC / 176~264VAC selected by switch 47~63Hz; 248~370VDC
3.2A/115V 1.6A/230V
Input voltage range
AC current
Inrush current
cold start 35A
Leakage current
Overload protection
Over voltage protection
Over temp. protection
Temperature coefficient
Set up, rise, hold up time
Vibration
<3.5mA/240VAC
105%~150% shutoff, AC recycle to restart
115%~135%
---
±0.03% / °C (0~50°C)
100ms, 50ms, 20ms
10~500Hz, 2G 10min./1cycle (1 hour each axes)
I/P-O/P:3KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC, for 1 min.
I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms min.
-10°C~+60% (refer to output derating curve), 20%-90% RH
-20ºC~+85ºC, 10%~95% RH
Withstand voltage
Isolation resistance
Working temp., humidity
Storage temp., humidity
Dimensions
7.83x4.33x1.97 inches (199x110x50 mm)
1.76 lbs (0.8 Kg)
Weight
Safety standards
EMC standards
UL1950, TUV EN60950, UL 1012
CISPR22 (EN55022), IEC1000-4-2,3,4,5 IEC1000-3-2
Notes:
1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient
2. Tolerance includes set up tolerance, line regulation, load regulation
3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor
4. Line regulation is measured from low line to high line at rated load
5, Load regulation is measure from 0% to 100% rated load
*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise cus-
tomers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for cus-
tomer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s pub-
lished specifications. Nothing will be covered outside of standard product warranty.
V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005
www.v-infinity.com
1-866-372-1258