NON-ISOLATED DC/DC CONVERTERS
4.5 Vdc - 13.8 Vdc Input
0.591 Vdc - 5.1 Vdc/20 A Output
VRP1-20E1AC
RoHS Compliant
Rev. B
Non-Isolated
Wide Output Trim Range
Output Over-Voltage Shutdown
OCP/SCP
High Efficiency
Fixed Switching Frequency
Low Cost
Low Output Ripple
Power Good Signal
Remote On/Off
Excellent Thermal Performance
Wide Input Voltage Range
Description
The VRP1-20E1AC is a non-isolated dc/dc converter that operates over a wide range of input voltage (Vin = 4.5
Vdc ~ 13.8 Vdc). This unit can provide a precisely regulated output voltage from 0.591 Vdc to 5.1 Vdc and can
deliver up to 20 A of output current. This unit is designed to be highly efficient and low cost. The converter is
provided in an industry standard package.
Part Selection
Output Voltage
Input Voltage
Max. Output
Current
Max. Output
Power
Typical
Efficiency
Model Number
Active High
0.591 Vdc - 5.1 Vdc
4.5 Vdc - 13.8 Vdc
20 A
100 W
94%
VRP1-20E1AC
Notes: 1. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
2. Add “G” suffix at the end of the model numbers listed above to indicate “Tray Packaging”.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
15 V
15 V
Notes
Input Voltage (continuous)
Output Enable Terminal Voltage
-0.3 V
-0.3 V
-
-
Ambient Temperature
Storage Temperature
-
-
0 C
70 C
-40 C
125 C
Input Specifications
Parameter
Min
Typ
Max
Notes
Input Voltage
Vo﹤ 3.45 V
Vo ≥ 3.45 V
4.5 V
1.3*Vo
12 V
12 V
13.8 V
13.8 V
An input line fuse must always be
used.
Input Current (full load)
-
-
20 A
Input Current (No load)
Remote Off Input Current
-
-
-
-
-
-
-
150 mA
50 mA
50 mA
20 mA
-
300 mA
-
100 mA
40 mA
1 A2s
-
Input Reflected Ripple Current (pk-pk)
Input Reflected Ripple Current (rms)
I2t Inrush Current Transient
Use a 1000uF AL-Cap on the input.
Turn-on Voltage Threshold
4.2 V
3.9 V
A 30.1K resistor is connected from
Enable to Vin
Turn-off Voltage Threshold
-
Note: All specifications are typical at 25 C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com