VLMS322.., VLMK322.., VLMO322.., VLMY322..
www.vishay.com
Vishay Semiconductors
Power SMD LED PLCC-4
FEATURES
• 3 cathode pins, 1 anode pin
• Available in 8 mm tape
• High brightness SMD LED
• Luminous intensity and color categorized per
packing unit
• Luminous intensity ratio per packing unit
IVmax./IVmin. 1.6
19210
• ESD-withstand voltage: Up to 2 kV according
to JESD22-A114-B
DESCRIPTION
• Suitable for all soldering methods according to
CECC 00802 and J-STD-020
The VLMS322.., VLMK322.., VLMO322.., and VLMY322..
series are an advanced development in terms of heat
dissipation.
• Preconditioning according to JEDEC level 2a
The leadframe profile of this PLCC-4 SMD package is
optimized to reduce the thermal resistance.
• Qualified according to JEDEC moisture sensitivity level 2a
• Compatible with IR reflow solder processes according to
CECC 00802 and J-STD-020
This allows higher drive current and doubles the light output
compared to Vishay’s high intensity SMD LED in PLCC-2
package.
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
APPLICATIONS
• Package: SMD PLCC-4
• Interior and exterior lighting
• Product series: power
• Indicator and backlighting purposes for audio, video,
LCDs, switches, symbols, illuminated advertising etc.
• Angle of half intensity: 60ꢀ
• Illumination purpose, alternative to incandescent lamps
• General use
PARTS TABLE
LUMINOUS
INTENSITY
(mcd)
FORWARD
VOLTAGE
(V)
WAVELENGTH
at IF
(mA)
at IF
(mA)
at IF
(mA)
(nm)
PART
COLOR
TECHNOLOGY
MIN. TYP. MAX.
MIN. TYP. MAX.
MIN. TYP. MAX.
VLMS322T2V1-GS08
VLMK322U1V2-GS08
Super red 355
Amber 450
450
900
50
625
610
600
582
630
-
640
621
612
594
50
50
50
50
1.7
-
2.1
1.9
2.1
2.1
2.6
2.6
2.6
2.6
50 AlInGaP on GaAs
50 AlInGaP on GaAs
50 AlInGaP on GaAs
50 AlInGaP on GaAs
750 1125 50
750 1125 50
750 1125 50
VLMO322U1V2-GS08 Soft orange 450
VLMY322U1V2-GS08 Yellow 450
605
588
1.7
1.7
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 ꢀC, unless otherwise specified)
VLMS322.., VLMK322.., VLMO322.., VLMY322..
PARAMETER
Reverse voltage (1)
TEST CONDITION
SYMBOL
VR
VALUE
UNIT
V
5
70
Forward current
IF
mA
mW
ꢀC
Power dissipation
at RT
Ptot
225
Junction temperature
Operating temperature range
Storage temperature range
Thermal resistance junction/ambient
Tj
125
Tamb
Tstg
- 40 to + 100
- 40 to + 100
290
ꢀC
ꢀC
Mounted on PC board FR4
RthJA
K/W
Note
(1)
Driving the LED in reverse direction is suitable for short term application
Rev. 1.3, 16-May-13
Document Number: 81183
1
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000