Use This Link to Check Out the New Combined C0G (NP0) and X7R Datasheet
VJ Safety Certified Capacitors X7R
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Safety Certified Applications
FEATURES
Available
• Approved IEC 60384-14
• Specialty: safety certified capacitors
• AEC-Q200 qualified available with PPAP
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Flexible termination “W” for improved
bending capability performance (1)
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Note
(1)
“W” flexible termination under qualification
APPLICATIONS
• Power supplies
• EMI and AC line filtering
• EV charging systems
• AC equipment and appliances
• Lighting strike and voltage surge protection
• Isolators
• Facsimile and telephone
ELECTRICAL SPECIFICATIONS
Note
•
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range X1 / Y2 (1): 100 pF to 4.7 nF
Capacitance Range X2 (1): 100 pF to 12 nF
Voltage Range: 250 VAC
Insulating Resistance:
at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less
at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less
Aging Rate: 1 ꢀ maximum per decade
Voltage Proof Test:
X1 / Y2: min. 1500 VAC
X2: min. 1075 VDC
Temperature Coefficient of Capacitance (TCC):
15 ꢀ from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF) (1)
:
Peak Impulse Voltage:
X1 / Y2: 5000 V
X2: 2500 V
2.5 ꢀ maximum
Note
(1)
Voltage Rating DC:
X1 / Y2: 2000 VDC
X2: 1500 VDC
Test conditions per IEC 60384-14:
1.0 VRMS at 1 kHz
Climatic Category According to EN 60068-1:
55/125/21
Revision: 06-Jul-2020
Document Number: 45020
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000