VJ OMD - C0G (NP0)
Vishay Vitramon
Surface Mount Ceramic Capacitor Solutions
for Boardflex Sensitive Applications
FEATURES
• OMD-Cap (Open Mode Design) reduce the risk
of shorts or low IR because of board flex cracks
•
•
High frequency filtering for switching power
RoHS
supplies
COMPLIANT
Available with 100 % voltage condition, process code “5H”
ELECTRICAL SPECIFICATIONS
NOTE: Electrical characteristics at + 25 °C unless otherwise
stated
(not possible for size 1206/1210 with voltage ≤ 630 V)
Available with polymer termination for increase resistance
to board flex cracking
•
APPLICATIONS
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 10 pF to 47 000 pF
Voltage Rating: 50 Vdc to 3000 Vdc
Temperature Coefficient of Capacitance (TCC):
C0G: 0 30 ppm/°C from - 55 °C to + 125 °C
Aging Rate: 0 % maximum per decade
• Input filter capacitors
• Output filter capacitors
•
•
Snubber capacitors reduce MOSFET voltage spikes
Lighting Ballasts
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for
a 1 to 5 second period and the charge/discharge current
does not exceed 50 mA
Dissipation Factor:
0.1 % max. at 1.0 Vrms and 1 MHz for values ≤ 1000 pF
0.1 % max. at 1.0 Vrms and 1 kHz for values > 1000 pF
≤ 200 Vdc: DWV at 250 % of rated voltage
500 Vdc: DWV at 200 % of rated voltage
630 Vdc: DWV at 150 % of rated voltage
1000 Vdc: DWV at 150 % of rated voltage
1500 Vdc: DWV at 120 % of rated voltage
2000 Vdc: DWV at 120 % of rated voltage
3000 Vdc: DWV at 120 % of rated voltage
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
At + 125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
DIMENSIONS in inches [millimeters]
PART
TERMINATION PAD
MAXIMUM
ORDERING
NUMBER
LENGTH
WIDTH
THICKNESS (T)
MINIMUM
MAXIMUM
0.126 0.00ꢀ
[3.20 0.20]
0.126 0.00ꢀ
[3.20 0.20]
0.1ꢀ0 0.010
[4.57 0.25]
0.177 0.010
[4.50 0.25]
0.177 0.010
[4.50 0.25]
0.220 0.00ꢀ
[5.59 0.20]
0.220 0.010
[5.59 0.25]
0.063 0.00ꢀ
[1.60 0.20]
0.09ꢀ 0.00ꢀ
[2.50 0.20]
0.0ꢀ0 0.010
[2.03 0.25]
0.126 0.00ꢀ
[3.20 0.20]
0.252 0.010
[6.40 0.25]
0.200 0.00ꢀ
[5.0ꢀ 0.20]
0.250 0.010
[6.35 0.25]
VJ1206
VJ1210
VJ1ꢀ0ꢀ
VJ1ꢀ12
VJ1ꢀ25
VJ2220
VJ2225
0.067 [1.6ꢀ]
0.067 [1.6ꢀ]
0.0ꢀ6 [2.1ꢀ]
0.0ꢀ6 [2.1ꢀ]
0.0ꢀ6 [2.1ꢀ]
0.0ꢀ6 [2.1ꢀ]
0.0ꢀ6 [2.1ꢀ]
0.010 [0.25]
0.02ꢀ [0.71]
0.010 [0.25]
0.010 [0.25]
0.010 [0.25]
0.010 [0.25]
0.010 [0.25]
0.010 [0.25]
0.02ꢀ [0.71]
0.030 [0.76]
0.030 [0.76]
0.030 [0.76]
0.030 [0.76]
0.030 [0.76]
ORDERING INFORMATION
VJ1206
A
101
J
X
B
A
T
##2)
CASE
SIZE
DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE
MARKING
PACKAGING
PROCESS
CODE
CODE
TOLERANCE
RATING1)
X = Ni barrier
1206
1210
1ꢀ0ꢀ
1ꢀ12
1ꢀ25
2220
2225
A = C0G (NP0) Expressed in
picofarads (pF).
The first two
digits are
F = 1 %
G = 2 %
H = 3 %
J = 5 %
K = 10 %
M = 20 %
A = 50 V
A = Unmarked T = 7" Reels 4X = OMD
100 %Tinplate
matte finish
F = AgPd
B = Polymer
100 % Tinplate
matte finish
Cap
B = 100 V
C = 200 V
E = 500 V
L = 630 V
G = 1000 V
R = 1500 V
F = 2000 V
H = 3000 V
R = 11 1/4"
Reels
5H = OMD
Cap 100 %
voltage
B = Bulk
W = Waffle
tray
significant, the
third is a
condition
multiplier.
Example:
101= 100 pF
Notes
1. DC voltage rating should not be exceeded in application
2. Process code with 2 digits has to be added (“5H” not possible for size 1206/1210 with voltage ≤ 630 V)
3. Polymer plus termination “B” termination part number code length dimensions positive tolerances (including bandwidth) above are allowed
to increase by the following amounts.
1210 and larger case sizes: Length 0.04 (0.1)
Document Number 45047
Revision 12-Oct-06
For technical questions, contact mlcc.specials@vishay.com
www.vishay.com
5