VJ OMD Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitor Solutions
for Boardflex Sensitive Applications
FEATURES
• Open Mode Design (OMD) reduces risk of
shorts or leakage in board flex applications
• Excellent reliability and thermal shock
performance
• Efficient low-power consumption, ripple
current capable to 1.2 ARMS at 100 kHz
• High voltage breakdown compared to
standard design
Available
• 100 % voltage conditioning available up to
630 VDC rating (process code “5H”)
Contact mlcc@vishay.com for higher voltages
• Polymer termination available for intensive board flex
requirements
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Demanding boardflex applications
• Input filter capacitors
• Output filter capacitors
• Snubber capacitors reduce MOSFET voltage spikes
• Filtering for switching power supplies
• For lighting and other AC applications please contact:
mlcc@vishay.com
ELECTRICAL SPECIFICATIONS
C0G (NP0)
X7R
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 10 pF to 47 nF
Voltage Range: 50 VDC to 3000 VDC
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 100 pF to 1.8 μF
Voltage Range: 16 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
Dissipation Factor (DF):
< 50 V ratings 3.5 % maximum at 1.0 VRMS and 1 kHz
≥ 50 V ratings 2.5 % maximum at 1.0 VRMS and 1 kHz
0.1 % maximum at 1.0 VRMS and
1 MHz for values ≤ 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Insulating Resistance:
at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less
Insulating Resistance:
at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less
at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less
Aging Rate: 1 % maximum per decade
at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E
Applied test voltages
≤ 250 VDC-rated:
500 VDC-rated:
630 VDC / 1000 VDC-rated:
1500 VDC to 3000 VDC-rated:
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E
Applied test voltages
250 % of rated voltage
min. 150 % of rated voltage
150 % of rated voltage
≤ 200 VDC-rated:
250 % of rated voltage
200 % of rated voltage
150 % of rated voltage
120 % of rated voltage
500 VDC-rated:
120 % of rated voltage
630 VDC / 1000 VDC-rated:
1500 VDC to 3000 VDC-rated:
Revision: 29-Jan-2021
Document Number: 45198
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000