VJ Commercial Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
FEATURES
• C0G (NP0) and X7R/X5R dielectrics offered
• C0G (NP0) is an ultra-stable dielectric
offering a very low Temperature Coefficient
of Capacitance (TCC)
• C0G (NP0) offers low dissipation
• Excellent aging characteristics
• Ideal for decoupling and filtering (X7R)
• Ideal for surge suppression and high voltage applications
• Wide range of case sizes, voltage ratings and capacitance
values
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Timing and tuning circuits
• Sensor and scanner applications
• Decoupling and filtering
• Surge suppression
ELECTRICAL SPECIFICATIONS
C0G (NP0) DIELECTRIC
X5R, X7R DIELECTRIC
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C
Operating Temperature: - 55 °C to + 150 °C
(X5R above + 85 °C changed characteristics)
(X7R above + 125 °C changed characteristics)
(above + 125 °C changed characteristics)
Capacitance Range: 1 pF to 56 nF
Voltage Range: 25 VDC to 1000 VDC
Capacitance Range: 120 pF to 6.8 μF
Voltage Range: 10 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C 30 ppm/°C from - 55 °C to + 125 °C
Temperature Coefficient of Capacitance (TCC):
X5R: 15 % from - 55 °C to + 85 °C, with 0 VDC applied
X7R: 15 % from - 55 °C to + 125 °C, with 0 VDC applied
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Dissipation Factor (DF):
10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz
16 V/25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E
Applied test voltages
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages
250 VDC-rated:
500 VDC-rated:
200 VDC-rated:
250 % of rated voltage
200 % of rated voltage
150 % of rated voltage
500 VDC-rated:
250 % of rated voltage
min. 150 % of rated voltage
150 % of rated voltage
630 VDC,1000 VDC-rated:
630 VDC, 1000 VDC-rated:
Revision: 15-May-12
Document Number: 45199
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000