VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
Surface Mount Multilayer Ceramic Chip Capacitors
for Commodity Applications
FEATURES
• Available from 0402 to 1210 body sizes
• Ultra stable C0G (NP0) dielectric
• High capacitance in X5R, X7R, Y5V
• For high frequency applications
• Ni-barrier with 100 % tin terminations
• Dry sheet technology process
• Base Metal Electrode system (BME)
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
• Consumer electronics
• Telecommunications
• Data processing
• Mobile applications
ELECTRICAL SPECIFICATIONS
Operating Temperature:
C0G (NP0): -55 °C to +125 °C
X5R: -55 °C to +85 °C
X7R: -55 °C to +125 °C
Y5V: -25 °C to +85 °C
Test Conditions for Capacitance and DF Measurement:
measured at conditions of 30 % to 70 % related humidity.
C0G (NP0): Apply 1.0 VRMS 0.2 VRMS, 1.0 MHz 10 % for
caps ≤ 1000 pF, at +25 °C ambient temperature
Apply 1.0 VRMS 0.2 VRMS, 1.0 kHz 10 % for
caps > 1000 pF, at +25 °C ambient temperature
X5R / X7R: Caps
≤
10 μF apply 1.0 VRMS
0.2 VRMS
,
Capacitance Range:
C0G (NP0): 0.5 pF to 39 nF
X5R: 47 nF to 220 μF
X7R: 100 pF to 47 μF
Y5V: 10 nF to 100 μF
1.0 kHz 10 %, at +25 °C ambient temperature (1)
Caps > 10 μF apply 0.5 VRMS
120 Hz 20 %, at +25 °C ambient temperature
0.2 VRMS
,
,
Y5V:
Caps ≤ 10 μF apply 1.0 VRMS 0.2 VRMS
1.0 kHz 10 %, at +20 °C ambient temperature
Caps > 10 μF apply 0.5 VRMS
120 Hz 20 %, at +20 °C ambient temperature
0.2 VRMS,
Voltage Range:
Note
C0G (NP0): 10 VDC to 100 VDC
X5R: 6.3 VDC to 50 VDC
X7R: 10 VDC to 100 VDC
Y5V: 6.3 VDC to 100 VDC
(1)
Test conditions: 0.5 VRMS 0.2 VRMS, 1 kHz 10 %
X7R: 0603: ≥ 2.2 μF / 10 V
0805: 10 μF (6.3 V and 10 V)
X5R: 0402: ≥ 4.7 μF / 6.3 V and ≥ 2.2 μF / 10 V
0603: 10 μF (6.3 V and 10 V)
Temperature Coefficient of Capacitance (TCC):
Aging Rate:
C0G (NP0): 0 ppm/°C 30 ppm/°C from -55 °C to +125 °C
X5R: 15 % from -55 °C to +85 °C without voltage applied
X7R: 15 % from -55 °C to +125 °C without voltage applied
C0G (NP0): 0 % per decade
X5R: 6.3 VDC / 10 VDC: 3 % maximum per decade
16 VDC / 25 VDC: 2 % maximum per decade
Y5V: + 30 % / - 80 % from -25 °C to +85 °C without voltage
applied
X7R: ≤ 10 VDC: 1.5 % maximum per decade
≥ 16 VDC: 1 % maximum per decade
Y5V: 6.3 VDC: 12.5 % maximum per decade
10 VDC / 16 VDC: 9 % maximum per decade
≥ 25 VDC: 7 % maximum per decade
Insulation Resistance (IR) at UR:
≥ 10 GΩ or R x C ≥ 500 Ω x F whichever is less
Test Conditions for Capacitance Tolerance:
Dielectric Strength Test:
preconditioning for X5R, X7R, Y5V MLCC: perform a heat
treatment at +150 °C 10 °C for 1 h, then leave in ambient
condition for 24 h 2 h before measurement
this is the maximum voltage the capacitors are tested 1 s to
5 s period and the charge / discharge current does not
exceed 50 mA.
≤ 100 VDC: 250 % of rated voltage
Revision: 01-Dec-2020
Document Number: 28548
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000