R
EM MICROELECTRONIC - MARIN SA
V6118
2, 4 and 8 Mutiplex LCD Driver
Description
Features
The V6118 is a universal low multiplex LCD driver. The
version V6118 drives two ways multiplex (two
□ V6118 2 is 2 way multiplex with 2 rows and 38 columns
□ V6118 4 is 4 way multiplex with 4 rows and 36 columns
□ V6118 8 is 8 way multiplex with 8 rows and 32 columns
□ Low dynamic current, 150 µA max.
2
blackplanes) LCD, the version V6118 4, four way
multiplex LCD , and the V6118 8, eight way multiplex
LCD. The display refresh is handled on chip via a 40 x 8
bit RAM which holds the LCD content driven by the driver.
LCD pixels (or segments) are addressed on a one to one
basis with the 40 x 8 bit RAM (a set bit corresponds to an
activated LCD pixel). The V6118 has very low dynamic
current consumption , 150 µA max., making it particularly
attractive for portable and battery powered applications.
The wide operating range on both the logic (VDD) and the
LCD (VLCD) supply voltages offers much application
flexibility. The LCD bias generation is internal. The voltage
bias levels can also be provided externally for applications
having large pixels sizes. The V6118 can be used as a
column only driver for cascading in large display
applications. In the column only mode, 40 column outputs
are available to address the display. A BLANK function is
provided to blank the LCD, useful at power up to hold the
display blank until the microprocessor has updated the
display RAM.
□ Low standby current, 1 µA max. at +25°C
□ Voltage bias and mux signal generation on chip
□ Display refresh on chip, 40 x 8 RAM for display storage
□ Display RAM addressable as 8, 40 bits words
□ Column driver only mode to have 40 column outputs
□ Crossfree cascadable for large LCD applications
□ Separate logic and LCD supply voltage pins
□ Wide power supply range: VDD: 2 to 6V, VLCD: 2 to 8V
□ BLANK function for LCD blanking on power up etc.
□ Voltage bias inputs for applications with large pixel
sizes
□ Bit mapped
□ Serial input / output
□ Very low external component count
□ -40 to + 85 °C temperature range
□ No busy states
□ LCD updating synchronized to the LCD refresh signal
□ QFP52 and TAB packages
Applications
□
□
□
□
□
□
□
Balances and scales
Automotive displays
Utility meters
Large displays (public information panel etc.)
Pagers
Portable, battery operated products
Telephones
Typical Operating Configuration
Pad Assignment
Fig. 2
Fig. 1
1
www.emmicroelectronic.com
Copyright © 2004, EM Microelectronic-Marin SA