Datasheet > V-730P395X9250

V-730P395X9250

更新时间： 2024-11-14 07:05:59

品牌	Logo	应用领域
威世 - VISHAY		电容器薄膜电容器
页数	文件大小	规格书
4页	174K
描述
Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

V-730P395X9250 数据手册

Type V-730P

Vishay Sprague

Film Capacitors

High Frequency, Wrap-and-Fill, Metallized Polypropylene

FEATURES

• Excellent AC performance

• Low Power dissipation

• Low dielectric absorption

• Close tolerance

RoHS

COMPLIANT

• High stability

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 85 °C

Voltage derating:

DC Life Test: 150 % of rated voltage for 1000 hours

at + 85 °C. No open or short circuits. No visible damage.

Maximum Δ CAP 1.0 %

Minimum IR = 50 % of initial limit

Maximum DF = 0.12 %

At + 105 °C, 50 % of + 85 °C rating

ESR: 20 kHz to 100 kHz

Capacitance Range: 0.022 µF to 10.0 µF

Capactiance Tolerance: 20 %, 10 %, 5 %

DC Voltage Rating: 100 WVDC to 630 WVDC

AC Voltage Rating: 70 Vrms to 275 Vrms, 60 Hz to 400 Hz

Humidity Test: 95 % relative humidity at + 40 °C for 250

hours. No visible damage.

Maximum Δ CAP 1.0 %

Minimum IR = 20 % of initial limit

Maximum DF = 0.12 %

Dissipation Factor: 0.1 % maximum

Measure all units at 1000 Hz at + 25 °C

AC Life Test: 110 % of rated rms voltage at 60 Hz for 1000

hours at + 85 °C.

DC Voltage Test: 200 % of rated voltage for 2 minutes

AC Voltage Test: 130 % of rated rms voltage at 60 Hz for

15 seconds

Maximum Δ CAP 5 %

Minimum IR = 50 % of initial limit

Maximum DF = 0.12 %

Insulation Resistance: Measured at 100 WVDC after a

2 minute charge.

At + 25 °C: 200 000 Megohm - Microfarads

or 400 000 Megohm minimum.

At + 85 °C: 10 000 Megohm - Microfarads

or 20 000 Megohm minimum.

PHYSICAL CHARACTERISTICS

Lead Pull: 5 pounds (2.3 kilograms) for one minute. No

physical damage.

At + 105 °C: 1000 Megohm - Microfarads

or 2000 Megohm minimum.

Lead Bend: After three complete consecutive bends. No

damage.

Marking: Sprague^®trademark, type or part number,

capacitance and voltage.

Vibration Test (Condition B): No mechanical damage,

short, open or intermittent circuits.

DIMENSIONS in inches [millimeters]

1.750

[44.45]

Min.

1.750

[44.45]

Min.

Max.

0.062 [1.57]

Solid Tinned Wire

0.032 [0.81] Nominal Dia.

(No. 20 AWG)

* Leads to be within 0.062" [1.57 mm] of center line at egrees but not less than 0.031" [0.79 mm] from edge.

Document Number: 42092

Revision: 16-Nov-07

For technical questions, contact: spresale@vishay.com

www.vishay.com

12 3 4

中文翻译

下载PDF

与V-730P395X9250相关器件

型号	品牌	获取价格	描述	数据表
V-730P395X9400	VISHAY	获取价格	Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene
V-730P405X0250	VISHAY	获取价格	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 250 V, 4 uF, THROUGH HOLE MOUNT, AXIAL LEADED,
V-730P405X5100	VISHAY	获取价格	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 100 V, 4 uF, THROUGH HOLE MOUNT, AXIAL LEADED,
V-730P405X5250	VISHAY	获取价格	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 250 V, 4 uF, THROUGH HOLE MOUNT, AXIAL LEADED,
V-730P405X9100	VISHAY	获取价格	Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene
V-730P405X9250	VISHAY	获取价格	Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene
V-730P473X9400	VISHAY	获取价格	Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene
V-730P473X9630	VISHAY	获取价格	Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene
V-730P474X9100	VISHAY	获取价格	Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene
V-730P474X9250	VISHAY	获取价格	Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene

与V-730P395X9250相关文章

国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

29
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

12
AMD宣布全球裁员约1000人，调整战略聚焦增长
2024-11-14

14
英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

35

产品中心

服务支持

精选活动

关于我们

帮助中心

V-730P395X9250

V-730P395X9250 数据手册

与V-730P395X9250相关器件

与V-730P395X9250相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

V-730P395X9250

V-730P395X9250 数据手册

与V-730P395X9250相关器件

与V-730P395X9250相关文章

您还可以找

您在本页遇到什么问题？