USB7016
6-Port USB 3.2 Gen 1 Type-C Controller Hub
®
• Supports battery charging of most popular battery
powered devices on all ports
Highlights
• 6-Port USB Smart Hub with:
-
USB-IF Battery Charging rev. 1.2 support
(DCP, CDP, SDP)
-
Native USB Type-C® support for
downstream port 1
-
-
-
-
Apple® portable product charger emulation
Chinese YD/T 1591-2006/2009 charger emulation
European Union universal mobile charger support
Supports additional portable devices
-
-
Three Standard USB 3.2 Gen 1 downstream ports
Two Standard USB 2.0 downstream ports
- Internal Hub Feature Controller enables:
-USB to I2C/SPI/I2S/GPIO bridge endpoint support
• On-chip Microcontroller
-USB to internal hub register write and read
-
manages I/Os, VBUS, and other signals
• USB Link Power Management (LPM) support
• 96kB RAM, 256kB ROM
• Programming of firmware image to external SPI
memory device from USB host
• 8kB One-Time-Programmable (OTP) ROM
-
Includes on-chip charge pump
• USB-IF Battery Charger revision 1.2 support on
downstream ports (DCP, CDP, SDP)
• Configuration programming via OTP Memory, SPI
external memory, or SMBus
• Enhanced OEM configuration options available
through either OTP or external SPI memory
• FlexConnect
-
The roles of the upstream and all downstream
ports are reversible on command
• Available in 100-pin (12mm x 12mm) VQFN
RoHS compliant package
• USB Bridging
• Commercial and industrial grade temperature
support
-
USB to I2C, SPI, I2S, and GPIO
• PortSwap
• Automotive/AEC-Q100 qualified
-
Configurable USB 2.0 differential pair signal swap
Target Applications
• PHYBoost
• Standalone USB Hubs
• Laptop Docks
-
Programmable USB transceiver drive strength for
recovering signal integrity
• PC Motherboards
• VariSense
• PC Monitor Docks
-
Programmable USB receive sensitivity
• Multi-function USB 3.2 Gen 1 Peripherals
• USB Power Delivery Billboard Device Support
-
Internal port can enumerate as a Power Delivery
Billboard device to communicate Power Delivery
Alternate Mode negotiation failure cases to host
Key Benefits
• USB 3.2 Gen 1 compliant 5 Gbps,
480 Mbps, 12 Mbps, and 1.5Mbps operation
• Compatible with Microsoft Windows 10, 8, 7, XP,
Apple OS X 10.4+, and Linux hub drivers
-
-
5V tolerant USB 2.0 pins
1.21V tolerant USB 3.2 Gen 1 pins
• Optimized for low-power operation and low ther-
mal dissipation
• Integrated termination and pull-up/down resistorsNative
USB Type-C Support
• 100-pin VQFN package (12mm x 12mm)
-
-
Type-C CC Pin with integrated Rp and Rd resistors
Integrated multiplexer on USB Type-C enabled
ports. USB 3.2 Gen 1 PHYs are disabled until a
valid Type-C attach is detected, saving idle power.
- Control for external VCONN supply
* USB Type-C® and USB-C® are registered trademarks of USB
Implementers Forum.
2021 Microchip Technology Inc.
DS00003740A-page 1