USB7216
6-Port USB 3.2 Gen 2 Type-C Controller Hub
®
• Supports battery charging of most popular battery
powered devices on all ports
Highlights
• 6-Port USB Smart Hub with:
-
USB-IF Battery Charging rev. 1.2 support
(DCP, CDP, SDP)
-
Native USB Gen 2 Type-C® support on
downstream port 1
-
-
-
-
Apple® portable product charger emulation
Chinese YD/T 1591-2006/2009 charger emulation
European Union universal mobile charger support
Supports additional portable devices
-
-
Three Standard USB 3.2 Gen 2 downstream ports
Two Standard USB 2.0 downstream ports
- Internal Hub Feature Controller enables:
-USB to I2C/SPI/I2S/GPIO bridge endpoint support
• On-chip Microcontroller
-USB to internal hub register write and read
-
manages I/Os, VBUS, and other signals
• USB Link Power Management (LPM) support
• 96kB RAM, 256kB ROM
• Programming of firmware image to external SPI
memory device from USB host
• 8kB One-Time-Programmable (OTP) ROM
-
Includes on-chip charge pump
• USB-IF Battery Charger revision 1.2 support on
downstream ports (DCP, CDP, SDP)
• Configuration programming via OTP Memory, SPI
external memory, or SMBus
• Enhanced OEM configuration options available
through either OTP or external SPI memory
• FlexConnect
-
The roles of the upstream and all downstream
ports are reversible on command
• Available in 100-pin (12mm x 12mm) VQFN
RoHS compliant package
• Multi-Host Endpoint Reflector
• Commercial and industrial grade temperature
support
-
Integrated host-controller endpoint reflector via
CDC/NCM device class for automotive applications
Target Applications
• Standalone USB Hubs
• Laptop Docks
• USB Bridging
-
USB to I2C, SPI, I2S, and GPIO
• PortSwap
• PC Motherboards
-
Configurable USB 2.0 differential pair signal swap
• PC Monitor Docks
• Multi-function USB 3.2 Gen 2 Peripherals
• PHYBoost
-
Programmable USB transceiver drive strength for
recovering signal integrity
Key Benefits
• USB 3.2 Gen 2 compliant 10 Gbps, 5 Gbps,
480 Mbps, 12 Mbps, and 1.5Mbps operation
• VariSense
-
Programmable USB receive sensitivity
• USB Power Delivery Billboard Device Support
-
-
-
5V tolerant USB 2.0 pins
-
Internal port can enumerate as a Power Delivery
Billboard device to communicate Power Delivery
Alternate Mode negotiation failure cases to host
1.21V tolerant USB 3.2 Gen 2 pins
Integrated termination and pull-up/down resistors
• Native USB Type-C Support
• Compatible with Microsoft Windows 10, 8, 7, XP,
Apple OS X 10.4+, and Linux hub drivers
-
-
Type-C CC Pin with integrated Rp and Rd resistors
Integrated multiplexer on USB Type-C enabled
ports. USB 3.2 Gen 2 PHYs are disabled until a
valid Type-C attach is detected, saving idle power.
Control for external VCONN supply
• Optimized for low-power operation and low ther-
mal dissipation
-
• 100-pin VQFN package (12mm x 12mm)
* USB Type-C® and USB-C® are registered trademarks of USB
Implementers Forum.
2018 - 2020 Microchip Technology Inc.
DS00003143B-page 1