USB2250/51/59
Ultra Fast USB 2.0 Multi-Format
Flash Media Controller
Datasheet
PRODUCT FEATURES
GPIO configuration and polarity
General Description
The SMSC USB2250/51/59 is a USB 2.0 compliant, high
speed Mass Storage Class Peripheral Controller intended for
reading and writing to more than 24 popular flash media
—
Up to 11 GPIOs (based on configuration) for special
function use: LED indicators, button inputs, power
control to memory devices, etc.
Four GPIO’s with up to 200 mA drive.
An additional 16 GPIO’s if CF is not used.
TM
—
—
formats from the CompactFlash® (CF), SmartMedia (SM),
TM
1
TM
xD Picture Card
(xD) , Memory Stick
(MS), Secure
TM
On Board 24MHz Crystal Driver Circuit
Optional external 24MHz clock input
4 Independent Internal Card Power FETs
—
—
8051 8-bit microprocessor
—
—
Digital (SD), and MultiMediaCard
(MMC) families.
The SMSC USB2250/51/59 is a fully integrated, single chip
solution capable of ultra high performance operation.
Average sustained transfer rates exceeding 35MB/s are
possible if the media and host can support those rates.
200mA each
"Fold-back" short circuit current protected
60MHz - single cycle execution
64KB ROM2; 14KB RAM
General Features
128-pin VTQFP lead-free RoHS compliant package
Targeted for applications in which single or "combo"
media sockets are used. Supports multiple simultaneous
card insertions
Internal Regulator for 1.8V core operation
Optimized pinout improves signal routing, easing
implementation and allowing for improved signal integrity.
OEM Selectable Features
Flexible assignment of number of LUNs and how card
types are associated with the LUNs
Hardware-controlled data flow architecture for all self-
mapped media
Pipelined hardware support for access to non-self-
mapped media
VID/PID/Language ID
28-character Manufacturer ID and Product string
12-hex digit (max) Serial Number string
Customizable Vendor specific data by optional use of
external serial EEPROM
Bus- or Self-powered selection
LED blink interval or duration
Hardware Features
Single Chip Flash Media Controller with non-multiplexed
interface for independent card sockets
Internal power FET configuration
Software Features
Flash Media Specification Revision Compliance
Optimized for low latency interrupt handling
Reduced memory footprint
—
Compact Flash Specification 4.1
–
–
CF UDMA Modes 0-4
CF PIO Modes 0-6
Device Firmware Upgrade (DFU) support of external
EEPROM or External Flash
—
—
—
—
—
—
Memory Stick Specification 1.43
Memory Stick Pro Format Specification 1.02
Memory Stick Pro-HG Duo Format Specification 1.01
Assembly line support
End user field upgrade support
DFU Package consists of driver, firmware, sample DFU
application and source code, DFU driver API
–
Memory Stick, MS Duo, HS-MS, MS Pro-HG, MS Pro
—
—
—
xD Picture Card 1.2
Smart Media Specification 1.3
Secure Digital 2.0
Optional (Mandatory on the USB2259) custom firmware
with external ROM (up to 128k)
Please see the USB2250/USB2251 Software Release
Notes for additional Software Features
–
HS-SD, HC-SD, TransFlash™ and reduced form factor
media
—
MultiMediaCard Specification 4.2
–
1/4/8 bit MMC
Applications
SDIO and MMC Streaming Mode support
Extended configuration options
Flash Media Card Reader/Writer
Printers
Desktop and Mobile PCs
Consumer A/V
—
—
xD player mode operation
Socket switch polarities, etc.
Media Players/Viewers
Vista ReadyBoostTM
Media Activity LED
1.) xD Picture Card not applicable to USB2251
2.USB2259 uses external ROM only, internal ROM unavailable
SMSC USB2250/51/59
DATASHEET
Revision 2.6 (05-08-08)