USB-2405 Series
2 or 4-ch 24-bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module
Features
●
Hi-Speed USB 2.0
●
USB bus powered
●
24-bit Sigma-Delta ADC with built-in anti-aliasing filter
●
2 or 4-ch simultaneous sampling analog inputs, up to 128kS/s
●
AC or DC input coupling, software selectable
●
Analog or digital triggering
●
Supports 2mA excitation output on each analog input channel
for IEPE sensor measurement
USB-2405/S
●
Full auto-calibration
USB-2405/2AI
Introduction
Software Utility
●
The USB-2405 is a 24-bit high-performance dynamic signal
acquisition USB module equipped with 2 or 4 analog input channels
providing simultaneous sampling at up to 128 kS/s per channel.
The USB-2405 also features software-selectable AC or DC coupling
input configuration and built-in high precision 2 mA excitation
current to measure integrated electronic piezoelectric (IEPE)
sensors such as accelerometers and microphones.
ADLINK Connection Explorer (ACE)
Device management utility
(Install MAPS Core from driver download)
●
U-Test
Ready-to-use functional testing utility
●
Phoenix GM Lite (Orderable)
Machine Condition Monitoring Software
The USB-2405 delivers high precision, DC and dynamic
measurement performance with very low temperature drift.
The onboard 24-bit Sigma-Delta ADC supports anti-aliasing filtering,
suppressing modulator and signal out-of-band noise and providing
usable signal bandwidth of the Nyquist rate, making it ideal for
high dynamic range signal measurement in vibration and acoustic
applications.
Ordering Information
●
USB-2405/S
4-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module
USB-2405/2AI
●
●
2-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module
USB-2405/OEM
The USB-2405 supports digital and analog trigger sources and
flexible trigger modes, including post, delay, middle, gated, and
pre-triggering for efficient data acquisition with no need for post-
processing. The USB-2405 is USB bus-powered and equipped with
BNC connectors and removable spring terminals for easy device
connectivity.
4-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module,
OEM board-level version, no enclosure
Standard Shipped Accessories
●
4-pin removable spring terminal
●
2 m USB Type A to USB Mini-B cable with lockable connector
Driver and SDK
●
Module stand
●
MAPS Core, LabVIEW, C/C++, Visual Studio.NET
●
Rail-mount kit
Supported Operating System
Optional Accessories
●
Windows 7/10
●
Phoenix GM Lite
●
Linux
License Key for Phoenix GM Lite
●
ICP Accelerometer IMI_603C01
ICP Accelerometer IMI_603C01, 100mV/g, 0.5 to 10kHz, 2-pin
conn. w/ 10-ft cable and magnetic mount