USB2231/USB2232
5th Generation Hi-Speed
USB Flash Media and
CIR Controller with
Integrated Card Power
FETs
Datasheet
PRODUCT FEATURES
—
—
12K Bytes of internal SRAM for general purpose
scratchpad
CIR Controller
■ Consumer IR (CIR) Controller with support for all
popular CIR formats.
768 Bytes of internal SRAM for general purpose scratchpad
or program execution while re-flashing external ROM
Two, Double Buffered Bulk Endpoints
Flash Media Controller
—
—
—
—
■ Complete System Solution for interfacing
SmartMediaTM (SM) or xD Picture CardTM (xD)1,
Memory StickTM (MS), High Speed Memory Stick
(HSMS), Memory Stick PRO (MSPRO), MS DuoTM
Secure Digital (SD), High Speed SD, Mini-Secure
Digital (Mini-SD), TransFlash (SD),
Two, Bi-directional 512 Byte Buffers for Bulk Endpoints
64 Byte RX Control Endpoint Buffer
64 Byte TX Control Endpoint Buffer
■ Internal or External Program Memory Interface
,
—
76K Byte Internal Code Space or Optional 128K Byte
External Code Space using Flash, SRAM or EPROM
memory.
MultiMediaCardTM (MMC), Reduced Size
■ On Board 24Mhz Crystal Driver Circuit
■ Can be clocked by 48MHz external source
■ On-Chip 1.8V Regulator for Low Power Core
Operation
■ Internal PLL for 480Mhz Hi-Speed USB Sampling,
Configurable MCU clock
MultiMediaCard (RS-MMC), NAND Flash, Compact
FlashTM (CF) and CF UltraTM I & II, and CF form-
factor ATA hard drives to Hi-Speed USB
—
Supports USB Bulk Only Mass Storage Compliant Bootable
BIOS
■ Support for simultaneous operation of all above
devices. (only one at a time of each of the following
groups supported: CF or ATA drive, SM or XD or
NAND, SD or MMC)
■ Supports firmware upgrade via USB bus if “boot
block” Flash program memory is used
■ 12 GPIOs for special function use: LED indicators,
button inputs, power control to memory devices, etc.
■ On-Chip 4-Bit High Speed Memory Stick and MS
PRO Hardware Circuitry
—
Inputs capable of generating interrupts with either edge
sensitivity
■ On-Chip firmware reads and writes High Speed
Memory Stick and MS PRO
■ Attribute bit controlled features:
—
—
—
—
—
—
Activity LED polarity/operation/blink rate
Full or Partial Card compliance checking
Bus or Self Powered
■ 1-bit ECC correction performed in hardware for
maximum efficiency
■ Hardware support for SD Security Command
Extensions
LUN configuration and assignment
Write Protect Polarity
TM
SmartDetach - Detach from USB when no Card Inserted
■ On-chip power FETs with short circuit protection for
supplying flash media card power
for Notebook apps
—
—
—
—
—
—
Cover Switch operation for xD compliance
Inquiry Command operation
SD Write Protect operation
Older CF card support
■ USB Bus Power Certified
■ 3.3 Volt I/O with 5V input tolerance on VBUS/GPIO3
■ Complete USB Specification 2.0 Compatibility for Bus
Powered Operation
Force USB 1.1 reporting
Internal or External Power FET operation
—
—
Includes Hi-Speed USB Transceiver
A Bi-directional Control and two Bi-directional Bulk
Endpoints are provided.
■ Compatible with Microsoft WinXP, WinME, Win2K
SP3, Apple OS10, Softconnex, and Linux Multi-LUN
Mass Storage Class Drivers
■ Win2K, Win98/98SE and Apple OS8.6 and OS9
Multi-LUN Mass Storage Class Drivers available from
SMSC
■ 128 Pin TQFP Package (1.0mm height, 14mmx14mm
footprint); green, lead-free package also available.
■ 8051 8 bit microprocessor
—
—
Provides low speed control functions
30 Mhz execution speed at 1 clock per instruction cycle
average
1.xD Picture Card not applicable to USB2231
SMSC USB2231/USB2232
DATASHEET
Revision 1.3 (07-12-05)