µPD75112(A), 75116(A)
4-Bit Single Chip-Microcomputer
Data Sheet
Description
The µPD75116(A) is one of the 4-bit single-chip micro-
computer 75X series.
Ordering Code
Qualty Grade
Package
Special
Special
Special
Special
64-pin plastic shrink DIP
(750 mil)
64-pin plastic QFP
(14 × 20 mm)
64-pin plastic shrink DIP
(750 mil)
64-pin plastic QFP
(14 × 20 mm)
µPD75112CW(A)-×××
The µPD75116(A) is a product with the extended ROM
capacity of the µPD75108(A). In addition of high-speed
operations, it can manipulate data in units of 1, 4 and 8
bits. In particular, the I/O operation of the µPD75116
have been improved by a wide variety of bit control
instructions. The µPD75116 is provided with interface
inputs/outputs with peripheral circuits having different
power voltages, and analog inputs and suitable for
controlling automobile electrical equipment, etc. For
the µPD75116(A), an on-chip pin-compatible one-time
PROM product (µPD75P116) is separately available for
µPD75112GF(A)-×××-3BE
µPD75116CW(A)-×××
µPD75116GF(A)-×××-3BE
Remarks: ××× is a ROM code number.
Please refer to "Quality Grade on NEC Semicon-
ductor Devices" (Document number IEI-1209) pub-
lished by NEC Corporation to know the specifica-
tion of quality grade on the devices and its recom-
mended applications.
system development evaluation.
FunctionsaredescribedindetailinthefollowingUser’s
Manual, which should be read when carrying out
design work.
Unless there are any particular functional differences,
the µPD75116(A) is described in this document as a
representative product.
µPD751×× Series User’s Manual: IEM-992
Features
• Higher reliability than µPD75116
• Architecture"75X"equivalentto8-bitmicrocomputer
• Minimum instruction execution time (high-speed
operation): 0.95 µs (when operated at 4.19 MHz and
5 V)
• Instructionexecutionvariablefunction: 0.95µs/1.91µs/
15.3 µs (when operated at 4.19 MHz)
• Many input/output ports: 58
• 3-channel on-chip 8-bit timers
• 8-bit on-chip serial interface
• Multi-interruptible vector interrupt function
Applications
Automobile electrical equipment, etc.
The information in this document is subject to change without notice.
The mark ★ shows major revised points.
Document No. IC-2811A
(O. D. No. IC-8261A)
Date Published March 1994 P
Printed in Japan
©NEC Corporation 1990