UMFT201XEDatasheet
Version 1.2
Document Reference No.: FT_000650 Clearance No.: FTDI#292
Future Technology
Devices International
Datasheet
UMFT201XE USB to I2C
Development Module
UMFT201XE is a USB to I2C DIP module with a 0.6” row pitch.
1.1 Features
1 Introduction
The UMFT201XE is a development module for
FTDI’s FT201XQ, one of the devices from FTDI’s
range of USB interface bridging integrated circuit
devices. FT201X is a USB to I2C interface with a
battery charger detection feature, which can
allow batteries to be charged with a higher
current from a dedicated charger port (without
the FT201X being enumerated). In addition,
asynchronous and synchronous bit bang interface
modes are available. The internally generated
clock (6MHz, 12MHz and 24MHz) can be brought
out on one of the CBUS pins to be usedto drive a
microprocessor or external logic.
The UMFT201XE utilises the FTDI FT201XQ; all
the features of the FT201X can be utilized with
the UMFT201XE. For a full list of the FT201X’s
features please see the FT201X datasheet which
can be found by clicking here.
In addition to the features listed in the FT201X
datasheet, the UMFT201XE has the following
features:
Small PCB assembly module designed to fit a
standard 15.24mm (0.6”) wide 16 pin DIP
socket. Pins are on a 2.54mm (0.1”) pitch.
On board USB ‘mini-B’ socket allows module
to be connected to a PC or USB host via a
standard A to mini-B USB cable.
The UMFT201XE is a module which is designed to
plug into a standard 0.6” wide 16 pin DIP socket.
All components used, including the FT201XQ are
Pb-free (RoHS compliant).
Functionally configurable using on board
jumpers. The default jumper setup enables
the module to function without peripheral
wires
or
application
board.
Other
configurations enable external power supply
options and variation of logic reference
levels.
Neither the whole nor any part of the information contained in,or the product described in this manual, may be adapte d or
reproduced in any material or electronic form without the prior written consent ofthe copyright holder. This product and its
documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made
or implied.Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result
of use or failure of this product.Your statutory rights are not affected.This product or any variant ofit is not intended for use
in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in
personal injury.This document provides preliminary information that may be subject to change without notice.No freedom to
use patents or other intellectualproperty rights is implied by the publication of this document. Future Technology Devices
International Ltd, Unit1,2 Seaward Place,Centurion Business Park,GlasgowG41 1HH United Kingdom.Scotland Registered
Company Number: SC136640
Copyright © 2016 Future Technology Devices International Limited
1