Applicable standard
Operating
Storage
-55 °C to +85 °C ( 95 %RH Max.)
-55 °C to +85 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
- W
-
50 Ω( 0 to 3 GHz)
Rating Power
-
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 5 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 5 mΩ Max.
1000 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 1 GHz.
Frequency 1 to 3 GHz.
No breakdown.
VSWR 1.2 Max.
VSWR 1.3 Max.
- dB Max.
X
-
-
-
Insertion loss
Frequency - to - GHz.
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ
-
by steel gauge.
Insertion force
Extraction force - N Min.
Insertion force - N Max.
- N Max.
-
-
-
-
-
-
-
-
Measured by applicable connector.
1000 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force - N Min.
1)Contact resistance:
Center contact 10 mΩ Max.
Outer contact 10 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
at 3 times for 3 directions.
2)No damage, crack and looseness of parts.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of - mm/min. and record the strength at which
the cable or connector breaks.
- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at -10 to +65 °C, 90 to 96 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 1000 MΩ Min.
(at dry)
3)No damage, crack and looseness of parts.
1)No damage, crack and looseness of parts.
X
X
-
-
Rapid change of
temperature
Temperature
Time
-55 → - → +85 →
- °C
30 → 3 →
30 →
3 min.
Under 5 cycles.
Corrosion salt mist
Soldering conditions
Exposed in 5 % salt water spray for 48 h.
VSWR 1.2 Max.(Frequency 0 to 1 GHz)
VSWR 1.3 Max.(Frequency 1 to 3 GHz)
No unusual solder wettability.
X
X
-
-
Temperature
Time
350℃ (Solidering iron bit)
3 ~ 5 sec
Count
0
Description of revisions
Designed
Checked
Date
NK.NINOMIYA
MT.KANEKO
SR.AIHARA
SR.AIHARA
20231107
20231107
20231106
20231106
Remark
Approved
Checked
Designed
Drawn
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-397071-40-00
UM-LR-PC-A(40)
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL0318-0229-0-40
FORM HD0011-2-1