UEE 150W Series
www.murata-ps.com
Isolated, High-Density, Eighth-Brick
DOSA Low Profile DC-DC Converters
Output (V)
Current (A)
Nominal Input (V)
3.3
5
45
30
48
48
48
12
12.5
For
efficient, fully isolated DC power in the smallest space, the UEE
open frame DC-DC converter series fit in industry-standard “eighth
bri
ck” outline dimensions and mounting pins (on quarter-brick pinout)
or surface mount option.
Typical units
FEATURES
Synchronous rectification yields high efficiency
over 90%
36 to 75 Vdc input range (48V nominal)
Outstanding thermal performance and derating
PRODUCT OVERVIEW
Low profile 0.42" height with 0.9" x 2.3" outline
dimensions
Units are offered with a fixed output voltage and
current up to 45 Amps. UEEs operate over a wide
temperature range (up to +85 degrees Celsius at
moderate airflow) with full rated power. Synchro-
nous rectifier topology yields excellent efficiency.
UEEs achieve these impressive mechanical and
environmental specs while delivering excellent
electrical performance in an industry standard
DOSA compatible through-hole package or surface
mount option. The unit is fully protected against
input undervoltage, output overcurrent and short
circuit. An on-board temperature sensor shuts
down the converter if thermal limits are reached
and automatically restarts the converter when the
fault is removed.
Fully isolated, 2250 Vdc (BASIC) insulation
An On/Off control input enables phased startup
and shutdown in multi-voltage applications. UEEs
include a Sense input to correct for ohmic losses. A
trim input may be connected to a user’s adjustment
potentiometer or trim resistors for output voltage
calibration.
UEEs include industry-standard safety certifi-
cations and BASIC I/O insulation provides input/
output isolation to 2250V. Radiation and conducted
emission testing is performed to widely accepted
EMC standards.
Industry standard DOSA eighth-brick pinout and
package and surface mount (SMT) option
Extensive self-protection and short circuit
features
On/Off control, trim and sense functions
Fully protected against temperature and voltage
limits
RoHS-6 compliant
UL/IEC 60950-1 and CAN/CSA C22.2 No. 60950-1,
2nd Edition safety approvals
Monotonic startup into normal and pre-biased
loads
F1
+Vin (1)
+Vout (8)
Barrier
External
DC
Power
Source
On/Off
Control
(2)
Controller
and Power
Open = On
Reference and
Error Amplifier
Trim (6)
logic)
-Vin (3)
-Vout (4)
Figure 1. Connection Diagram
Typical topology is shown. Murata Power Solutions recommends an external fuse.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_UEE 150W_Series.A02 Page 1 of 35