ALUMINUM ELECTROLYTIC CAPACITORS
Chip Type, Low Impedance,
Long Life Assurance
CW series
Chip type with load life of 7000 hours at +105°C
Low impedance temperature range up to +105°C
.
.
Applicable to automatic mounting machine using carrier tape.
Adapted to the RoHS directive (2002/95/EC).
Low Impedance
CB
C W
Specifications
Item
Performance Characteristics
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
–25 ~ +105°C
6.3 ~ 50V
10 ~ 470µF
±20% at 120Hz, 20°C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V)
6.3
10
16
25
35
50
tan
δ
tan δ (MAX.)
0.32
0.28
0.26
0.16
0.14
0.14
Measurement frequency : 120Hz
Rated voltage (V)
6.3
10
3
16
2
25
2
35
2
50
2
Stability at Low Temperature
Impedance ratio
ZT / Z20 (MAX.)
Z–25°C / Z+20°C
4
Capacitance change
tan δ
Within ±30% of initial value
300% or less of initial specified value
Initial specified value or less
After 7000 hours' application of rated voltage
at 105°C , capacitors meet the characteristic
requirements listed at right.
Endurance
Shelf Life
Leakage current
After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
The capacitors shall be kept on the hot plate maintained at 250°C
Capacitance change
tan δ
Within ±10% of initial value
Initial specified value or less
Initial specified value or less
Resistance to soldering
heat
for 30 seconds. After removing from the hot plate and restored
at room temperature, they meet the characteristic requirements
listed at right.
Leakage current
Marking
Black print on the case top.
Type numbering system (Example : 10V 150 F)
µ
Chip Type
(φ5 ~ 6.3)
Positive
Plastic platform
0.3MAX.
Voltage ( C : 16V )
Series
C±0.2
L±0.3
Negative
Positive
Capacitance
Lot No.
H
(φ8 ~ 10 )
Plastic platform
Voltage ( V : 35V )
Trade mark
0.3MAX.
Series
C±0.2
L±0.5
Negative
Lot No.
Capacitance
H
Pressure relief vent
Voltage
V
6.3
j
10
A
16
C
25
E
35
V
50
H
Code
Dimension table in next page.
CAT.8100V