uClamp0544P
μClampTM
4-Line ESD Protection
PROTECTION PRODUCTS - MicroClampTM
Features
Description
The μClampTM series of TVS arrays are designed to pro-
tect sensitive electronics from damage or latch-up due
to ESD. It is designed to replace single line devices such
as multilayer varistors (MLVs) in space constrained ap-
plications such as cell phones, notebook computers, and
other portable electronics. It features large cross-sec-
tional area junctions for conducting high transient cur-
rents. TVS diodes offer desirable characteristics for
board level protection including fast response time, low
operating and clamping voltage, and no device degrada-
tion.
Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
Ultra-small package
Protects four data lines
Low clamping voltage
Working voltage: 5V
Low capacitance (10pF)
Solid-state silicon-avalanche technology
The μClampTM0544P is in a 10-pin, RoHS/WEEE compli-
ant, SLP2510P8 package. It measures 2.5 x 1.0 with
a nominal height of 0.58mm. The leads are spaced at
a pitch of 0.5mm and are finished with lead-free
NiPdAu. They are designed for easy PCB layout by
allowing the traces to run straight through the device.
Each device features four TVS diodes with an operat-
ing voltage of 5 volts and a maximum loading capaci-
tance of only 10pF.
Mechanical Characteristics
SLP2510P8 package
RoHS/WEEE Compliant
Nominal Dimensions: 2.5 x 1.0 x 0.58 mm
Lead Finish: NiPdAu
Molding compound flammability rating: UL 94V-0
Marking : Marking code
Packaging : Tape and Reel
They may be used to meet the ESD immunity require-
ments of IEC 61000-4-2, Level 4 (±15kV air, ±8kV
contact discharge). The combination of small size and
high ESD surge capability makes them ideal for use in
portable applications such as cellular phones, digital
cameras, and notebook computers.
Applications
Cellular Handsets & Accessories
Notebooks & Handhelds
mp3 Players
Cordless Phones
Portable Instrumentation
Digital Cameras
Peripherals
Dimensions
Schematic
2.50
1
2
5
4
1
2
1.00
0.50 BSC
0.58
3,8
Note: Pins 6, 7, 9, and 10 are not internally connected.
Nominal Dimensions (mm)
(SLP2510P8 Bottom View)
www.semtech.com
Revision 12/6/2008
1