UCC29900
www.ti.com
SLUS923B –APRIL 2009–REVISED JUNE 2010
Integral Cycle Controller
Check for Samples: UCC29900
1
FEATURES
DESCRIPTION
•
•
•
•
Integral Cycle Control for High Efficiency
Burst Mode Operation at all Load Levels
The UCC29900 is a new class of Integral Cycle
Control (ICC) controller designed to implement
ultra-high efficiency isolated switching power stages.
ICC can be employed to achieve ultra-high
conversion efficiency over a wide range of load
current. The hysteretic mode output voltage control
employed exhibits fast transient response, with
almost zero output overshoot. Isolation stage
efficiencies of >96% have been demonstrated in
reference designs.
Allows Easy Use of Low Cost Self-Driven
Secondary-Side Synchronous Rectifiers (SRs)
Advanced Drive Signal Timing Control for
Volt-Sec Balance
Light-Load Mode for Reduced Power
Consumption at No Load and Light Load
•
•
Integrated Soft-Start Function
Frequency Dithering for Improved EMI
Reduction
ICC controllers operate the switching power stage in
high efficiency burst mode at all load levels, rather
than the more conventional PWM mode.
•
•
Bus Voltage UVLO and OVP Sensing
Current Sense Input for Overcurrent
Protection
The UCC29900 is a highly integrated ICC controller,
incorporating all the features necessary to implement
•
•
•
SCP Input Pin to Flag Short-Circuit Condition
Selectable Latching or Hiccup Mode OCP/SCP
a
wide range of high efficiency designs. The
UCC29900 has been designed for ease of use, and
incorporates many useful features, including
over-current and short-circuit protection, bus under- &
over-voltage detection, soft-start and light load
management.
START Output – Ease Startup Bias Design,
(allow improved PFC stage startup transient)
•
FAULT Output to Indicate Latched Fault State
APPLICATIONS
•
High Efficiency AC-DC Converters
•
Low Profile & High Density AC-DC Adapters
SIMPLIFIED APPLICATION DIAGRAM
3.3 V
VOUT
5
1
9
11
COUT
OC
CLAMP VDD
FB
NC
M1
VBUS
MODE
+
2
8
6
HG
7
4
3
T1
M2
VIN
UCC29900
LG
CS
SCP
START VDD
VSS FAULT
14 13
12
10
+
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCT PREVIEW information concerns products in the
formative or design phase of development. Characteristic data and
other specifications are design goals. Texas Instruments reserves
the right to change or discontinue these products without notice.
Copyright © 2009–2010, Texas Instruments Incorporated