UCC29910
www.ti.com
SLUSA04B –DECEMBER 2009–REVISED JUNE 2010
Buck PFC Controller
Check for Samples: UCC29910
1
FEATURES
DESCRIPTION
•
•
•
•
•
Buck Power Factor Correction for High
Efficiency Across Line
The UCC29910 Buck Power Factor Correction (PFC)
controller provides a relatively flat high-efficiency
performance across universal line for designers
requiring a high power factor (>0.9) and wishing to
meet the requirements of IEC 61000-3-2. Based on a
Buck Topology, inherent inrush current limiting
eliminates the need for additional components. With a
typical bus voltage of 84 V, the topology is ideally
suited for use with low voltage stress downstream
regulation/isolation power trains, such as half-bridge
stages controlled by the UCC29900, (Texas
Instruments Literature Number, SLUS923). This
combination offers low common mode noise
Low Off-Line Startup Current, With SmartStart
Algorithm for Fast Startup With Soft-Start
Compatible With Resistive or Pass Transistor
Fed Startup from the AC Line
Low Power SmartBurst Mode for Standby and
Light-Load Conditions
Current Sense Inputs for PFC control and
Overload Protection
•
•
Line Sense UVLO
generation
allowing
reduced
filtering
and
Sense and Drive Control for External Startup
Depletion Mode FET
exceptionally high conversion efficiency.
•
Latching Fault Input Pin
The UCC29910 is a highly integrated controller
designed for ease of use, which incorporates all the
control features needed for high efficiency designs. It
incorporates AC mains UVLO and controlled soft start
for fast start-up and with “no spark” will not require
the use of additional inrush protection circuitry. A
particular design goal of the part is enhanced
light-load efficiency, achieved through advanced
management algorithms for best-in-class no-load and
light-load performance.
APPLICATIONS
•
•
High Efficiency AC-DC Adapters
Low Profile & High Density Adapters
SIMPLIFIED APPLICATION DIAGRAM
DOWNSTREAM ISOLATION
AND REGULATION STAGE
VOUT
EMC
FILTER
EMC
VAC
FILTER
HS BULK
SENSE
FAULT
FEEDBACK
BIAS
WINDING
DRIVER
3.0 V
4
1
10
13
LINESNS VDD VDD PFCDRV
11 NC
CS
CS
3
5
2
UCC29910PW
9
BIASSNS
12 BIASCTRL
VBULK
NC REFIN VSS FAULT
7
6
14
8
REF
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2010, Texas Instruments Incorporated