Datasheet > UC2904J

UC2904J

更新时间： 2024-11-24 23:38:55

品牌	Logo	应用领域
其他 - ETC		模拟IC
页数	文件大小	规格书
6页	334K
描述
Analog IC

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

UC2904J 数据手册

UC1904

UC2904

UC3904

Precision Quad Supply and Line Monitor

FEATURES

DESCRIPTION

•

Inputs for Monitoring Up to Four

Supply Voltages

The UC1904 Quad Supply Monitor will respond to under- and over-volt-

age conditions on up to four continuously monitored voltage levels. Four

independent positive voltages can be monitored or, alternatively, two of

the sense inputs are preset to monitor -5V and -12V supplies. The de-

vice also monitors Over-Current and Line Sense inputs, both with preci-

sion input thresholds.

•

Two Inputs Preset for -5V and -12V

Monitoring, or Programmable

Positive Levels

•

Precision 2.5V Reference

Four open collector outputs on the UC1904 give the following re-

sponses: 1. The OV/OC output is a latched over-voltage, or over-current

response. 2. A Power Good signal responds low with any fault detection

– on power-up a programmable delay is used to hold this output low for

a system Power On Reset signal. 3. The PWRW output responds only to

a Line Sense input, for early warning of power failures. 4. The last open

collector, the ON/OFF output, generates a delayed supply OFF control

signal in response to an OFF input command, under-voltage condition,

or line fault detection.

Separate Inputs for Over-Current and

Line Fault Sensing

•

Adjustable Under- to Over-Voltage

Fault Windows

Latched Over-Voltage and

Over-Current Output

Power Good and Power Warning

Outputs

The OV-UV fault window is adjustable with a programming input. The

thresholds are centered around the precision 2.5V reference, with a

scaled hysteresis for precise, glitch free operation. In the positive mode

of operation, the fault windows at each of the sense inputs can be inde-

pendently scaled using external resistors and the 2.5V reference output.

An Auto Restart function couples with the under-voltage and line sens-

ing circuits to allow controlled power supply start-up and shutdown.

Auto Restart Function with ON/OFF

Control, and Programmable Delay

Programmable Pwr On Reset Delay

This device will operate over a supply range of 4.75V to 18V. The device

is available in a DIP, SOIC, or PLCC outline. This device is ESD pro-

tected on all pins.

BLOCK DIAGRAM

Note: Pin Numbers refer to J, N, and DW Packages.

4/97

12 3 4 5 6

中文翻译

下载PDF

与UC2904J相关器件

型号	品牌	获取价格	描述	数据表
UC2904N	TI	获取价格	Precision Quad Supply and Line Monitor
UC2904Q	TI	获取价格	Precision Quad Supply and Line Monitor
UC2904QTR	TI	获取价格	Precision Quad Supply and Line Monitor
UC2906	TI	获取价格	Sealed Lead-Acid Battery Charger
UC2906DW	TI	获取价格	Sealed Lead-Acid Battery Charger
UC2906DWG4	TI	获取价格	Sealed Lead-Acid Battery Charger
UC2906DWTR	TI	获取价格	Sealed Lead-Acid Battery Charger
UC2906DWTRG4	TI	获取价格	Sealed Lead-Acid Battery Charger
UC2906J	ROCHESTER	获取价格	0.025 A BATTERY CHARGE CONTROLLER, CDIP16, CERAMIC, DIP-16
UC2906J	TI	获取价格	0.04A BATTERY CHARGE CONTROLLER, CDIP16