Datasheet > UC1730N

UC1730N

更新时间： 2024-11-13 23:38:51

品牌	Logo	应用领域
其他 - ETC		/
页数	文件大小	规格书
5页	308K
描述
Industrial Control IC

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

UC1730N 数据手册

UC1730

UC2730

UC3730

Thermal Monitor

FEATURES

DESCRIPTION

•

On-Chip Temperature Transducer

The UC1730 family of integrated circuit devices are designed to be used in

a number of thermal monitoring applications. Each IC combines a tempera-

ture transducer, precision reference, and temperature comparator allowing

the device to respond with a logic output if temperatures exceed a user pro-

grammed level. The reference on these devices is capable of supplying in

excess of 250mA of output current − by setting a level of power dissipation

the rise in die temperature will vary with airflow past the package, allowing

the IC to respond to airflow conditions

•

Temperature Comparator Gives

Threshold Temperature Alarm

•

Power Reference Permits Airflow

Diagnostics

Precision 2.5V Power Reference

Permits Airflow Diagnostics

These devices come in an 8-Pin DIP, plastic or ceramic, a 5-Pin TO-220 or a

PLCC-20 version. In the 8-Pin version, a PTAT (proportional to absolute

temperature) output reports die temperature directly. This output is config-

ured such that its output level can be easily scaled up with two external gain

resistors. A second PTAT source is internally referenced to the temperature

comparator. The other input to this comparator can then be externally pro-

grammed to set a temperature threshold. When this temperature threshold

is exceeded an alarm delay output is activated. Following the activation of

the delay output, a separate open collector output is turned on. The delay

pin can be programmed with an external RC to provide a time separation

between activation of the delay pin and the alarm pin, permitting shutdown

diagnostics in applications where the open collector outputs of multiple parts

are wire OR’ed together.

Transducer Output is Easily Scaled

for Increased Sensitivity

Low 2.5mA Quiescent Current

The 5-Pin version in the TO-220 package is well suited for monitoring

heatsink temperatures. Enhanced airflow sensitivities can be obtained with

this package by mounting the device to a small heatsink in the airstream.

This version of the device does not include the PTAT output or the open col-

lector alarm output.

BLOCK DIAGRAM

Pin numbers shown for 8-Pin DIP, ( ) number for 5-Pin TO-220.

10/94

12 3 4 5

中文翻译

下载PDF

与UC1730N相关器件

型号	品牌	获取价格	描述	数据表
UC1730Q	ETC	获取价格	Temperature Transducer/Sensor
UC1730QTR	TI	获取价格	IC,TEMPERATURE SENSOR,BIPOLAR,LDCC,20PIN,PLASTIC
UC1730T	ETC	获取价格	Temperature Transducer/Sensor
UC1764	NJSEMI	获取价格	(SINGLE, DUAL) MOS FET P-CHANNEL, ENHANCEMENT
UC-17SCN8A80DU	PHOENIX	获取价格	Circular Connector,
UC-17SCN8AT0DU	PHOENIX	获取价格	Circular Connector,
UC1818	ECM	获取价格	Power Inductors
UC1818T-100	ECM	获取价格	Power Inductors
UC1818T-100K	ECM	获取价格	General Purpose Inductor
UC1818T-101	ECM	获取价格	Power Inductors