5秒后页面跳转
UBA2071ATS/N1 PDF预览

UBA2071ATS/N1

更新时间: 2024-09-27 15:55:51
品牌 Logo 应用领域
恩智浦 - NXP 驱动光电二极管
页数 文件大小 规格书
35页 574K
描述
IC,BALLAST/BACKLIGHT CONTROLLER/DRIVER,SSOP,24PIN,PLASTIC

UBA2071ATS/N1 技术参数

是否Rohs认证:符合生命周期:Obsolete
包装说明:SSOP, SSOP24,.3Reach Compliance Code:unknown
风险等级:5.83Is Samacsys:N
JESD-30 代码:R-PDSO-G24端子数量:24
最高工作温度:100 °C最低工作温度:-25 °C
封装主体材料:PLASTIC/EPOXY封装代码:SSOP
封装等效代码:SSOP24,.3封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, SHRINK PITCH电源:12 V
认证状态:Not Qualified子类别:Switching Regulator or Controllers
标称供电电压 (Vsup):12 V表面贴装:YES
温度等级:OTHER端子形式:GULL WING
端子节距:0.635 mm端子位置:DUAL
Base Number Matches:1

UBA2071ATS/N1 数据手册

 浏览型号UBA2071ATS/N1的Datasheet PDF文件第2页浏览型号UBA2071ATS/N1的Datasheet PDF文件第3页浏览型号UBA2071ATS/N1的Datasheet PDF文件第4页浏览型号UBA2071ATS/N1的Datasheet PDF文件第5页浏览型号UBA2071ATS/N1的Datasheet PDF文件第6页浏览型号UBA2071ATS/N1的Datasheet PDF文件第7页 
UBA2071; UBA2071A  
Half bridge control IC for CCFL backlighting  
Rev. 01 — 23 June 2008  
Product data sheet  
1. General description  
The UBA2071 and UBA2071A are high voltage ICs intended to drive Cold Cathode  
Fluorescent Lamps (CCFLs) or External Electrode Fluorescent Lamps (EEFLs) for  
backlighting applications. They can drive a half bridge circuit made up of two NMOSFETs  
with a supply voltage of up to 550 V, so the inverter can be supplied directly from a 400 V  
PFC bus.  
The UBA2071 and UBA2071A contain a controller, a level shifter, a bootstrap diode and  
drivers for the external half bridge power switches. It also contains a low frequency PWM  
generator, which can be used to control the brightness level of the lamps, using an analog  
brightness/dimming control voltage. PWM dimming can also be realized, using a digital  
PWM input signal. PWM dimming can be synchronized with other ICs. The lamp current is  
controlled by means of a true zero voltage switching resonant control principle, ensuring  
lowest possible switch losses in the half bridge power structure.  
The UBA2071 is designed to be supplied by a V/t supply from the half bridge circuit that  
it drives. The IC itself needs little current and if the IC is off, a clamp protects the supply  
voltage from getting too high.  
The UBA2071A is designed to be supplied by a fixed 12 V supply. It has a lower supply  
start voltage and no supply clamp.  
2. Features  
I Suitable for operating in a very wide inverter supply voltage range (up to 550 V DC).  
I Integrated level shifter.  
I Integrated bootstrap diode.  
I Lamp current control by means of a true zero voltage switching resonant control  
principle.  
I Sample & Hold circuit, maintaining current control value during PWM lamp-off  
situation.  
I Separately definable time constants for current control loop and PWM dimming  
attack/decay setting.  
I Overvoltage control.  
I Overcurrent protection.  
I Ignition failure detection.  
I Hard switching control.  
I Arcing detection.  
I Open/short pin protections on feedback pins.  
I Integrated, programmable fault timer.  

与UBA2071ATS/N1相关器件

型号 品牌 获取价格 描述 数据表
UBA2071ATS/N1,118 NXP

获取价格

UBA2071ATS - Half bridge control IC for CCFL backlighting SSOP2 24-Pin
UBA2071T NXP

获取价格

Half bridge control IC for CCFL backlighting
UBA2071TS NXP

获取价格

Half bridge control IC for CCFL backlighting
UBA2072 NXP

获取价格

Low Voltage Full-bridge control IC for CCFL backlighting
UBA2072_1 NXP

获取价格

Low Voltage Full-bridge control IC for CCFL backlighting
UBA2072_2 NXP

获取价格

Low Voltage Full-bridge control IC for CCFL backlighting
UBA2072_3 NXP

获取价格

Low Voltage Full-bridge control IC for CCFL backlighting
UBA2072_4 NXP

获取价格

Low Voltage Full-bridge control IC for CCFL backlighting
UBA2072_5 NXP

获取价格

Low Voltage Full-bridge control IC for CCFL backlighting
UBA2072_6 NXP

获取价格

Low Voltage Full-bridge control IC for CCFL backlighting