5秒后页面跳转
TX2-L2-H-9V-Z PDF预览

TX2-L2-H-9V-Z

更新时间: 2024-11-11 18:45:19
品牌 Logo 应用领域
松下 - PANASONIC 光电二极管继电器
页数 文件大小 规格书
6页 126K
描述
Power/Signal Relay, DPDT, Latched, 0.022A (Coil), 9VDC (Coil), 200mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount

TX2-L2-H-9V-Z 技术参数

生命周期:ObsoleteReach Compliance Code:unknown
ECCN代码:EAR99HTS代码:8536.49.00.50
风险等级:5.62主体宽度:7.4 mm
主体高度:8.2 mm主体长度或直径:15 mm
最大线圈电流(直流):0.022 A线圈工作电压(直流):6.75 V
线圈功率:200 mW线圈释放电压(直流):6.75 V
线圈电阻:405 Ω最大线圈电压(直流):9 V
线圈/输入电源类型:DC最大触点电流(直流):2 A
触点(直流)最大额定R负载:2A@220VDC最大触点电压(直流):220 V
触点/输出电源类型:DC电气寿命:100000 Cycle(s)
安装特点:THROUGH HOLE-STRAIGHT MOUNT工作时间:4 ms
最高工作温度:85 °C最低工作温度:-40 °C
包装方法:BOX; TAPE AND REEL物理尺寸:15mm x 7.4mm x 8.2mm
参考标准:BSI; CSA; UL继电器动作:LATCHED
继电器功能:DPDT继电器类型:POWER/SIGNAL RELAY
释放时间:4 ms表面贴装:NO
端接类型:SOLDERBase Number Matches:1

TX2-L2-H-9V-Z 数据手册

 浏览型号TX2-L2-H-9V-Z的Datasheet PDF文件第2页浏览型号TX2-L2-H-9V-Z的Datasheet PDF文件第3页浏览型号TX2-L2-H-9V-Z的Datasheet PDF文件第4页浏览型号TX2-L2-H-9V-Z的Datasheet PDF文件第5页浏览型号TX2-L2-H-9V-Z的Datasheet PDF文件第6页 
TESTING  
2 AMP. HIGH CAPACITY  
RELAY WITH HIGH  
SURGE VOLTAGE & HIGH  
BREAKDOWN VOLTAGE  
TX-RELAYS  
FEATURES  
7.4  
.291  
7.4  
.291  
15  
.591  
15  
.591  
• Breakdown voltage between contacts and coil: 2,000 V  
• Surge withstand between contacts and coil: 2,500 V  
• High contact capacity: 2 A 30 V DC  
8.4  
8.2  
.323  
.331  
• Surface-mount type available  
mm inch  
SPECIFICATIONS  
Contact  
Characteristics  
Arrangement  
2 Form C  
Initial insulation resistance*1  
Between open con-  
tacts  
Min. 1,000 M(at 500 V DC)  
Initial contact resistance, max.  
(By voltage drop 6 V DC 1 A)  
1,000 Vrms for 1 min.  
(Detection current: 10 mA)  
100 mΩ  
Initial  
Contact material  
Gold-clad silver alloy  
2 A 30 V DC  
1,000 Vrms for 1 min.  
(Detection current: 10 mA)  
breakdown Between contact sets  
Nominal switching capacity  
(resistive load)  
voltage  
Between contact and  
2,000 Vrms for 1 min.  
coil  
(Detection current: 10 mA)  
Max. switching power  
(resistive load)  
60 W  
Between open  
contacts  
(10×160 µs)  
Rating  
1,500 V (FCC Part 68)  
Max. switching voltage  
Max. switching current  
Min. switching capacity 1  
220 V DC  
2 A  
Initial surge  
voltage  
Between contacts  
and coil (2×10 µs)  
2,500 V (Bellcore)  
10 µA 10 mV DC  
140 mW (1.5 to 24 V DC)  
270 mW (48 V DC)  
Temperature rise*2 (at 20°C)  
Max. 50°C  
Single side stable  
Nominal  
operating  
power  
Max. 4 ms (Approx. 2 ms)  
[Max. 4 ms (Approx. 2 ms)]  
Operate time [Set time]*3 (at 20°C)  
1 coil latching  
100 mW (1.5 to 24 V DC)  
200 mW (1.5 to 24 V DC)  
108  
2 coil latching  
Release time [Reset time]*4 (at  
20°C)  
Max. 4 ms (Approx. 1 ms)  
[Max. 4 ms (Approx. 2 ms)]  
Min. 750 m/s2 {75 G}  
Min. 1,000 m/s2 {100 G}  
196 m/s2 {20 G}, 10 to 55 Hz  
at double amplitude of 3.3 mm  
294 m/s2 {30G}, 10 to 55 Hz  
at double amplitude of 5 mm  
Mechanical (at 180 cpm)  
2 A 30 V DC  
Expected  
life (min.  
operations)  
Functional*5  
Destructive*6  
105  
Shock resistance  
resistive  
Electrical  
(at 20 cpm)  
1 A 30 V DC  
resistive  
5×105  
Functional*7  
Vibration resistance  
Destructive  
Notes:  
1This value can change due to the switching frequency, environmental conditions,  
and desired reliability level, therefore it is recommended to check this with the ac-  
tual load.  
Conditions for oper-  
–40°C to +85°C (up to 24 V coil)  
2The upper limit for the ambient temperature is the maximum temperature that  
can satisfy the coil temperature rise. Under the packing condition, allowable tem-  
perature range is from –40 to +70°C –40°C to +158°F.  
ation, transport and Ambient tem- –40°F to +185°F (up to 24 V coil)  
storage*8  
perature 2  
–40°C to +70°C (48 V coil)  
–40°F to +158°F (48 V coil)  
(Not freezing and  
condensing at low  
temperature)  
Remarks  
Humidity  
5 to 85% R.H.  
* Specifications will vary with foreign standards certification ratings.  
*1 Measurement at same location as "Initial breakdown voltage" section.  
*2 By resistive method, nominal voltage applied to the coil; contact carrying current:  
2 A.  
Unit weight  
Approx. 2 g .071 oz  
*3 Nominal voltage applied to the coil, excluding contact bounce time.  
*4 Nominal voltage applied to the coil, excluding contact bounce time without diode.  
*5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs.  
*6 Half-wave pulse of sine wave: 6 ms.  
*7 Detection time: 10 µs.  
*8 Refer to 4. Conditions for operation, transport and storage mentioned in Cautions  
for use (Page 178).  
ORDERING INFORMATION  
Ex. TX  
2
SA  
L
H
3V  
Z
Contact arrangement Surface-mount availability  
Operating function Terminal shape Coil voltage (DC)  
Packing style  
2: 2 Form C  
Nil: Standard PC board terminal type or  
Nil: self-clinching terminal type  
Nil: Single side  
Nil: stable  
L: 1 coil latching  
L2: 2 coil latching  
Nil: Standard PC 1.5, 3, 4.5, 5, 6, Nil: Tube packing  
board terminal or  
surface-mount  
terminal  
9, 12, 24, 48* V Z: Tape and reel  
packing(picked  
SA: Standard surface-mount terminal type  
SL: High connection reliability surface-mount  
SL: terminal type  
from the 8/9/10/12  
-pin side  
H: Self-clinching  
terminal  
SS: Space saving surface-mount terminal type  
Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number suffix “-X” is  
*48 V coil type: Single side stable only  
needed when ordering.  
(ex.) TX2SA-3 V-X  
2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.  
154  

与TX2-L2-H-9V-Z相关器件

型号 品牌 获取价格 描述 数据表
TX2-L-3V NAIS

获取价格

2 A CAPACITY RELAY WITH HIGH SURGE VOLTAGE & HIGH BREAKDOWN VOLTAGE
TX2-L-3V PANASONIC

获取价格

Best seller with broad lineup and AC 2000 V breakdown voltage.
TX2-L-3V-1-X PANASONIC

获取价格

Electromechanical Relay, DPDT, 4.5VDC (Coil), 1A (Contact), 220VDC (Contact), Random, DC O
TX2-L-3V-TH PANASONIC

获取价格

Power/Signal Relay, DPDT, Latched, 0.033A (Coil), 3VDC (Coil), 100mW (Coil), 7.5A (Contact
TX2-L-3V-TH-X PANASONIC

获取价格

暂无描述
TX2-L-3V-TH-Z PANASONIC

获取价格

Electromechanical Relay, DPDT, 4.5VDC (Coil), 7.5A (Contact), 220VDC (Contact), Random, AC
TX2-L-3V-X PANASONIC

获取价格

Electromechanical Relay, DPDT, 4.5VDC (Coil), 2A (Contact), 220VDC (Contact), Random, DC O
TX2-L-3V-Z PANASONIC

获取价格

Power/Signal Relay, 2 Form C, DPDT, Latched, 0.033A (Coil), 3VDC (Coil), 100mW (Coil), 2A
TX2-L-4.5V PANASONIC

获取价格

Best seller with broad lineup and AC 2000 V breakdown voltage.
TX2-L-4.5V NAIS

获取价格

2 A CAPACITY RELAY WITH HIGH SURGE VOLTAGE & HIGH BREAKDOWN VOLTAGE