TSOP753..W, TSOP755..W
www.vishay.com
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
• Compatible also with short burst dataformats
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Capable of side or top view
• Low profile 2.35 mm
• Insensitive to supply voltage ripple and noise
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
DESCRIPTION
MECHANICAL DATA
The TSOP753..W, TSOP755..W series are a miniaturized
receiver module for infrared remote control systems. Two
PIN diodes and a preamplifier are assembled on a
leadframe, the epoxy package contains an IR filter.
Pinning:
1, 4 = GND, 2 = VS, 3 = OUT
The TSOP753..W..series is optimized to suppress almost all
spurious pulses from energy saving lamps like CFLs. AGC3
may also suppress some data signals if continuously
transmitted.
ORDERING CODE
Taping:
TSOP75...WTT - top view taped
TSOP75...WTR - side view taped
The TSOP755..W series contain a very robust AGC5. This
series should only be used for critically noisy environments.
This component has not been qualified according to
automotive specifications.
PARTS TABLE
NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC3)
VERY NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC5)
AGC
30 kHz
33 kHz
TSOP75330W
TSOP75530W
TSOP75533W
TSOP75333W
36 kHz
TSOP75336W (1)
TSOP75338W (2)(3)(4)(5)
TSOP75340W
TSOP75536W
Carrier
frequency
38 kHz
40 kHz
56 kHz
TSOP75538W
TSOP75540W
TSOP75356W
TSOP75556W
Package
Pinning
Heimdall no lens
1, 4 = GND, 2 = VS, 3 = OUT
Dimensions (mm)
Mounting
6.8 W x 3.0 H x 2.35 D
SMD
Application
Remote control
Best remote control code
(1) MCIR (2) Mitsubishi (3) RECS-80 Code (4) r-map (5) XMP-1, XMP-2
Rev. 1.5, 22-Jul-16
Document Number: 82497
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000