TSOP753.., TSOP755..
www.vishay.com
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
• Compatible also with short burst dataformats
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
4
3
• Capable of side or top view
2
1
• Two lenses for high sensitivity and wide
receiving angle
• Insensitive to supply voltage ripple and noise
20953
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
MECHANICAL DATA
Pinning:
The TSOP753.., TSOP755.. series are
a two lens
miniaturized receiver module for infrared remote control
systems. One PIN diode per lens and a preamplifier are
assembled on a leadframe, the epoxy lens cap contains an
IR filter.
1, 4 = GND, 2 = VS, 3 = OUT
ORDERING CODE
Taping:
The TSOP753..series is optimized to suppress almost all
spurious pulses from energy saving lamps like CFLs. AGC3
may also suppress some data signals if continuously
transmitted.
TSOP75...TT - top view taped
TSOP75...TR - side view taped
The TSOP755.. series contain a very robust AGC5. This
series should only be used for critically noisy environments.
This component has not been qualified according to
automotive specifications.
PARTS TABLE
NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC3)
VERY NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC5)
AGC
30 kHz
33 kHz
TSOP75330
TSOP75530
TSOP75533
TSOP75333
36 kHz
TSOP75336 (1)
TSOP75338 (2)(3)(4)(5)
TSOP75340
TSOP75536
Carrier
frequency
38 kHz
40 kHz
56 kHz
TSOP75538
TSOP75540
TSOP75356
TSOP75556
Package
Pinning
Heimdall
1, 4 = GND, 2 = VS, 3 = OUT
Dimensions (mm)
Mounting
6.8 W x 3.0 H x 3.2 D
SMD
Remote control
Application
Best remote control code
(1) MCIR (2) Mitsubishi (3) RECS-80 Code (4) r-map (5) XMP-1, XMP-2
Rev. 1.5, 22-Jul-16
Document Number: 82495
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000