New Product
TSOP581.., TSOP583.., TSOP591.., TSOP593.., TSOP585.., TSOP595..
www.vishay.com
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
FEATURES
• Low supply current
• Photo detector and preamplifier in one
package
• Internal filter for PCM frequency
• Improved shielding against EMI
• Supply voltage: 2.5 V to 5.5 V
• Suitable for short bursts: burst length ≥ 6
carrier cycles
• Improved immunity against ambient light
19026
• Insensitive to supply voltage ripple and noise
• Compliant to RoHS Directive 2011/65/EU and in
accordance to WEEE 2002/96/EC
Note
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
MECHANICAL DATA
Pinning for TSOP581.., TSOP583.., TSOP585:
1 = OUT, 2 = GND, 3 = VS
DESCRIPTION
Pinning for TSOP591.., TSOP593.., TSOP595:
1 = OUT, 2 = VS, 3 = GND
These products are miniaturized receiversfor infrared
remote control systems. A PIN diode and a preamplifier are
assembled on a lead frame, the epoxy package acts as an
IR filter.
The demodulated output signal can be directly decoded by
a
microprocessor. The TSOP581.., TSOP591.. are
Please see the document “Product Transition Schedule” at
www.vishay.com/ir-receiver-modules/ for up-to-date info,
when this product will be released.
compatible with all common IR remote control data formats.
The TSOP593.., TSOP583.. are optimized to better
suppress spurious pulses from energy saving fluorescent
lamps. The TSOP585.., TSOP595.. have an excellent noise
suppression. It is immune to dimmed LCD backlighting and
any fluorescent lamps. AGC3 and AGC5 may also suppress
some data signals in case of continuous transmission. This
component has not been qualified according to automotive
specifications.
PARTS TABLE
SHORT BURST AND
HIGH DATA RATE
(AGC1)
NOISY ENVIRONMENTS AND
VERY NOISY ENVIRONMENTS AND
SHORT BURSTS
(AGC3)
SHORT BURSTS
(AGC5)
CARRIER
FREQUENCY
PINNING
1 = OUT, 2 = GND, 1 = OUT, 2 = VS, 1 = OUT, 2 = GND, 1 = OUT, 2 = VS, 1 = OUT, 2 = GND, 1 = OUT, 2 = VS,
3 = VS
3 = GND
3 = VS
3 = GND
3 = VS
3 = GND
30 kHz
33 kHz
36 kHz
38 kHz
40 kHz
56 kHz
TSOP58130
TSOP58133
TSOP58136
TSOP58138
TSOP58140
TSOP58156
TSOP59130
TSOP59133
TSOP59136
TSOP59138
TSOP59140
TSOP59156
TSOP58330
TSOP58333
TSOP58336
TSOP58338
TSOP58340
TSOP58356
TSOP59330
TSOP59333
TSOP59336
TSOP59338
TSOP59340
TSOP59356
TSOP58530
TSOP58533
TSOP58536
TSOP58538
TSOP58540
TSOP58556
TSOP59530
TSOP59533
TSOP59536
TSOP59538
TSOP59540
TSOP59556
BLOCK DIAGRAM
APPLICATION CIRCUIT
17170-10
16833_14
R1
C1
Transmitter
with
TSALxxxx
IR receiver
3
1
VS
+ VS
33 kΩ
µC
OUT
GND
VO
Band
pass
Demo-
dulator
GND
Input
AGC
The external components R and C are optional
2
1
1
PIN
Control circuit
to improve the robustness against electrical overstress
(typical values are R = 100 Ω, C = 0.1 µF).
1
1
Rev. 1.0, 23-Feb-11
Document Number: 82462
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000