TSOP132.., TSOP134.., TSOP136..
www.vishay.com
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
FEATURES
• Improved dark sensitivity
• Improved immunity against optical noise
• Improved immunity against Wi-Fi noise
• Low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Insensitive to supply voltage ripple and noise
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
23051
MECHANICAL DATA
Pinning for TSOP13...:
1 = OUT, 2 = GND, 3 = VS
ADDITIONAL RESOURCES
3
D
3D Models
DESCRIPTION
The TSOP13... series devices are the latest generation miniaturized IR receiver modules for infrared remote control systems.
This series provides improvements in sensitivity to remote control signals in dark ambient as well as in sensitivity in the presence
of optical disturbances e.g. from CFLs. The robustness against spurious pulses originating from Wi-Fi signals has been
enhanced.
The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The
demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP132.., TSOP134.., and TSOP136.. series devices are designed to receive long burst codes (10 or more carrier cycles
per burst). The third digit designates the AGC level (AGC2, AGC4, or AGC6) and the last two digits designate the band-pass
frequency (see table below). The higher the AGC, the better noise is suppressed, but the lower the code compatibility. AGC2
provides basic noise suppression, AGC4 provides enhanced noise suppression and AGC6 provides maximized noise
suppression. Generally, we advise to select the highest AGC that satisfactorily receives the desired remote code.
These components have not been qualified to automotive specifications.
PARTS TABLE
BASIC NOISE SUPPRESSION ENHANCED NOISE SUPPRESSION MAXIMIZED NOISE SUPPRESSION
AGC
(AGC2)
(AGC4)
TSOP13430
(AGC6)
30 kHz
33 kHz
36 kHz
38 kHz
40 kHz
56 kHz
TSOP13230
TSOP13233
TSOP13236
TSOP13238
TSOP13240 (12)
TSOP13256 (1)
TSOP13630
TSOP13633
TSOP13636 (6)
TSOP13638
TSOP13640
TSOP13656 (8)
TSOP13433
TSOP13436 (2)(5)(7)
TSOP13438 (3)(4)(10)(11)
TSOP13440
Carrier
frequency
TSOP13456 (9)
Package
Pinning
Minimold
1 = OUT, 2 = GND, 3 = VS
5.4 W x 6.35 H x 4.9 D
Leaded
Dimensions (mm)
Mounting
Application
Remote control
(1) Cisco (2) MCIR (3) Mitsubishi (4) NEC (5) Panasonic (6) RC-5 (7) RC-6
Best choice for
(8) RCA (9) r-step (10) Sejin 4PPM (11) Sharp (12) Sony
Note
30 kHz and 33 kHz only available on written request
•
Rev. 1.7, 16-Dec-2019
Document Number: 82806
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000