TSOP131..DF1P, TSOP133..DF1P, TSOP135..DF1P
www.vishay.com
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
FEATURES
• Improved dark sensitivity
• Improved immunity against optical noise
• Improved immunity against Wi-Fi noise
• Low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Insensitive to supply voltage ripple and noise
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
22911
MECHANICAL DATA
Pinning for TSOP13...DF1P:
1 = OUT, 2 = GND, 3 = VS
ADDITIONAL RESOURCES
3
D
3D Models
DESCRIPTION
The TSOP13...DF1P series devices are the latest generation miniaturized IR receiver modules for infrared remote control
systems. This series provides improvements in sensitivity to remote control signals in dark ambient as well as in sensitivity in
the presence of optical disturbances e.g. from CFLs. The robustness against spurious pulses originating from Wi-Fi signals has
been enhanced.
The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The
demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP131..DF1P, TSOP133..DF1P, and TSOP135..DF1P series devices are designed to receive short burst codes (6 or
more carrier cycles per burst). The third digit designates the AGC level (AGC1, AGC3, or AGC5) and the last two digits designate
the band-pass frequency (see table below). The higher the AGC, the better noise is suppressed, but the lower the code
compatibility. AGC1 provides basic noise suppression, AGC3 provides enhanced noise suppression and AGC5 provides
maximized noise suppression. Generally, we advise to select the highest AGC that satisfactorily receives the desired remote
code.
These components have not been qualified to automotive specifications.
PARTS TABLE
BASIC NOISE SUPPRESSION
(AGC1)
ENHANCED NOISE
SUPPRESSION (AGC3)
MAXIMIZED NOISE
SUPPRESSION (AGC5)
AGC
30 kHz
33 kHz
36 kHz
38 kHz
40 kHz
56 kHz
TSOP13130DF1P
TSOP13133DF1P
TSOP13136DF1P
TSOP13138DF1P
TSOP13140DF1P
TSOP13156DF1P
TSOP13330DF1P
TSOP13333DF1P
TSOP13336DF1P (1)
TSOP13338DF1P (2)(4)
TSOP13340DF1P
TSOP13356DF1P (3)
Minimold
TSOP13530DF1P
TSOP13533DF1P
TSOP13536DF1P
TSOP13538DF1P
TSOP13540DF1P
TSOP13556DF1P
Carrier
frequency
Package
Pinning
1 = OUT, 2 = GND, 3 = VS
5.4 W x 6.35 H x 4.9 D
Leaded
Dimensions (mm)
Mounting
Application
Remote control
Best choice for
(1) RCMM (2) RECS-80 Code (3) r-map (4) XMP-1, XMP-2
Note
30 kHz and 33 kHz only available on written request
•
Rev. 1.0, 23-Oct-2019
Document Number: 82881
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000