TSOP132..DF1P, TSOP134..DF1P, TSOP136..DF1P
www.vishay.com
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
FEATURES
• Improved dark sensitivity
• Improved immunity against optical noise
• Improved immunity against Wi-Fi noise
• Low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Insensitive to supply voltage ripple and noise
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
22911
MECHANICAL DATA
Pinning for TSOP13...DF1P:
1 = OUT, 2 = GND, 3 = VS
ADDITIONAL RESOURCES
3
D
3D Models
DESCRIPTION
The TSOP13...DF1P series devices are the latest generation miniaturized IR receiver modules for infrared remote control
systems. This series provides improvements in sensitivity to remote control signals in dark ambient as well as in sensitivity in
the presence of optical disturbances e.g. from CFLs. The robustness against spurious pulses originating from Wi-Fi signals has
been enhanced.
The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The
demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP132..DF1P, TSOP134..DF1P, and TSOP136..DF1P series devices are designed to receive long burst codes (10 or
more carrier cycles per burst). The third digit designates the AGC level (AGC2, AGC4, or AGC6) and the last two digits designate
the band-pass frequency (see table below). The higher the AGC, the better noise is suppressed, but the lower the code
compatibility. AGC2 provides basic noise suppression, AGC4 provides enhanced noise suppression and AGC6 provides
maximized noise suppression. Generally, we advise to select the highest AGC that satisfactorily receives the desired remote
code.
These components have not been qualified to automotive specifications.
PARTS TABLE
BASIC NOISE SUPPRESSION ENHANCED NOISE SUPPRESSION MAXIMIZED NOISE SUPPRESSION
AGC
(AGC2)
(AGC4)
TSOP13430DF1P
TSOP13433DF1P
TSOP13436DF1P (2)(5)(7)
TSOP13438DF1P (3)(4)(10)(11)
TSOP13440DF1P
TSOP13456DF1P (9)
Minimold
(AGC6)
30 kHz
33 kHz
36 kHz
38 kHz
40 kHz
56 kHz
TSOP13230DF1P
TSOP13233DF1P
TSOP13236DF1P
TSOP13238DF1P
TSOP13240DF1P (12)
TSOP13256DF1P (1)
TSOP13630DF1P
TSOP13633DF1P
TSOP13636DF1P (6)
TSOP13638DF1P
TSOP13640DF1P
TSOP13656DF1P (8)
Carrier
frequency
Package
Pinning
1 = OUT, 2 = GND, 3 = VS
5.4 W x 6.35 H x 4.9 D
Leaded
Dimensions (mm)
Mounting
Application
Remote control
(1) Cisco (2) MCIR (3) Mitsubishi (4) NEC (5) Panasonic (6) RC-5 (7) RC-6
Best choice for
(8) RCA (9) r-step (10) Sejin 4PPM (11) Sharp (12) Sony
Note
30 kHz and 33 kHz only available on written request
•
Rev. 1.1, 16-Dec-2019
Document Number: 82882
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000