New Product
TSMP1138
Vishay Semiconductors
www.vishay.com
IR Sensor Module for Remote Control Systems
FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 30 kHz to 55 kHz, all
data formats
• If the IR singal strength is less then 300 mW/mꢀ
(distance more than 0.6 m with a typical IR
remote control), the frequency range is up to
60 kHz
• Improved shielding against electrical field
disturbance
1
2
94 8691
3
• AGC to suppress ambient noise
• High sensitivity, long receiving range
MECHANICAL DATA
Pinning:
• Supply voltage: 2.5 V to 5.5 V
• Carrier out signal for IR repeater applications
1 = GND, 2 = Carrier OUT, 3 = VS
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
The TSMP1138 is a miniaturized sensor for receiving the
modulated signal of infrared remote control systems. A PIN
diode and preamplifier are assembled on a lead frame, the
epoxy package is designed as an IR filter. The modulated
output signal, carrier out, can be used for repeater
applications and code learning applications.
This component has not been qualified according to
automotive specifications.
PARTS TABLE
CARRIER FREQUENCY
38 kHz
CODE LEARNING APPLICATIONS
TSMP1138
BLOCK DIAGRAM
APPLICATION CIRCUIT
16833_11
R3 680 Ω
Supply voltage
+ 5 V
3
TSMP1138
R1 100 Ω
VS
TSAL6400
33 kΩ
33 kΩ
C1
4.7 µF
2
OUT
Band
pass
Compa-
rator
R4
3 Ω
Input
AGC
VO
GND
0 V
1
PIN
Recommended circuit for best sensitivity of the TSOP9xx38 in repeater applications.
It limits the output voltage swing VO to about 0.7 V in order to avoid internal coupling.
Control circuit
GND
Rev. 1.1, 08-Jan-13
Document Number: 82484
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000