TS80C31X2
8-bit CMOS Microcontroller 0-60 MHz
1. Description
TEMIC TS80C31X2 is high performance CMOS and The fully static design of the TS80C31X2 allows to
reduce system power consumption by bringing the clock
frequency down to any value, even DC, without loss of
data.
ROMless versions of the 80C51 CMOS single chip 8-
bit microcontroller.
The TS80C31X2 retains all features of the TEMIC
TSC80C31 with 128 bytes of internal RAM, a 5-source,
4 priority level interrupt system, an on-chip oscilator
and two timer/counters.
The TS80C31X2 has 2 software-selectable modes of
reduced activity for further reduction in power
consumption. In the idle mode the CPU is frozen while
the timers, the serial port and the interrupt system are still
operating. In the power-down mode the RAM is saved
and all other functions are inoperative.
In addition, the TS80C31X2 has a dual data pointer, a
more versatile serial channel that facilitates
multiprocessor communication (EUART) and a X2 speed
improvement mechanism.
2. Features
● 80C31 Compatible
● Interrupt Structure with
•
•
•
•
8031 pin and instruction compatible
Four 8-bit I/O ports
•
•
5 Interrupt sources,
4 priority level interrupt system
Two 16-bit timer/counters
128 bytes scratchpad RAM
● Full duplex Enhanced UART
•
•
Framing error detection
Automatic address recognition
● High-Speed Architecture
•
•
40 MHz @ 5V, 30MHz @ 3V
● Power Control modes
•
•
•
Idle mode
X2 Speed Improvement capability (6 clocks/
machine cycle)
Power-down mode
Power-off Flag
30 MHz @ 5V, 20 MHz @ 3V (Equivalent to
60 MHz @ 5V, 40 MHz @ 3V)
● Once mode (On-chip Emulation)
● Power supply: 4.5-5.5V, 2.7-5.5V
● Dual Data Pointer
● Asynchronous port reset
● Temperature ranges: Commercial (0 to 70oC) and
Industrial (-40 to 85oC)
● Packages: PDIL40, PLCC44, VQFP44 1.4, PQFP F1
(13.9 footprint)
Rev. A - Mar. 19, 1999
1
Preliminary