TS809/810/809R/810R Series
Microprocessor Reset Circuit
Pin Definition:
TS809/TS810
1. Ground
SOT-23
TS809R/TS810R
1. RESET(RESET)
2. Ground
2. RESET(RESET)
3. Vcc
3. Vcc
General Description
The TS809/810 series are microprocessor (µP) supervisory circuit used to monitor the power supplies in µP and
digital systems. They provide excellent circuit reliability and low cost by eliminating external components and
adjustments when used with +5V, +3.3V, +3.0V powered circuits. These circuits perform a single function: they assert
a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for at least
140ms after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply
voltages are available. The TS809/810 series have push pull outputs. The TS809/809R have an active low RESET
output, while the TS810/810R has an active high (RESET) output. The reset comparator is designed to ignore fast
transients on VCC, and the output guaranteed to be in the correct logic state for VCC down to 1V. Low supply correct
makes the TS809/810 series ideal for use in portable equipment.
Features
Ordering Information
●
●
Highly Accurate: ±2%
Part No.
TS809CXx RF
TS810CXx RF
TS809RCXx RF
TS810RCXx RF
Package
Packing
Precision monitoring of +3V, +3.3V and +5V power
supply voltage
SOT-23
SOT-23
SOT-23
SOT-23
3Kpcs / 7” Reel
3Kpcs / 7” Reel
3Kpcs / 7” Reel
3Kpcs / 7” Reel
●
●
●
●
●
●
●
●
●
Fully specified over temperature
Available in three output configurations
Push-Pull RESET low output (TS809/TS809R)
Push-Pull (RESET) high output (TS810/TS810R)
140mS min. power-on reset pulse width
12uA supply current
Note: x is the threshold voltage type, option as
A : 4.63V
E : 2.93V
I : 2.0V
B : 4.38V C : 4.00V D : 3.08V
F : 2.63V G : 2.32V H : 2.1V
Guaranteed reset valid to Vcc = +1V
Power supply transient immunity
No external components
Application Circuit
Applications
●
●
●
●
●
●
Battery-operated systems
Controllers
Intelligent instruments
Critical uP and uC power monitoring
Portable / Battery powered equipment
Automotive
Pin Descriptions
Name
Description
Gnd
RESET
(RESET)
Vcc
Ground
RESET – TS809 / TS809R (Active Low)
(RESET) – TS810 / TS810R (Active High)
Operating voltage input
1/7
Version: A07