TS7800B series
3-Terminal Fixed Positive Voltage Regulator
ITO-220
Pin assignment:
1. Input
Voltage Range 5V to 24V
Output Current up to 1.5A
2. Ground
3. Output
(Heatsink surface
connected to Pin 2)
General Description
These voltage regulators are monolithic integrated circuits designed as fixed-voltage regulators for a wide variety of
applications including local, on-card regulation. These regulators employ internal current limiting, thermal shutdown, and
safe-area compensation. With adequate heatsink they can deliver output currents up to 1.5 ampere.
Although designed primarily as a fixed voltage regulator, these devices can be used with external components to obtain
adjustable voltages and currents.
This series is offered in 3-pin TO-220, ITO-220 package.
Features
Standard Application
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Output current up to 1.5A
No external components required
Internal thermal overload protection
Internal short-circuit current limiting
Output transistor safe-area compensation
Output voltage offered in 4% tolerance
Ordering Information
A common ground is required between the input and the
output voltages. The input voltage must remain typically 2.0V
above the output voltage even during the low point on the
Input ripple voltage.
Part No.
TS78xxBCZ
TS78xxBCI
Operating Temp. Package
0 ~ +125oC
TO-220
ITO-220
XX = these two digits of the type number indicate voltage.
* = Cin is required if regulator is located an appreciable
distance from power supply filter.
Note: Where xx denotes voltage option.
** = Co is not needed for stability; however, it does improve
transient response.
Absolute Maximum Rating
Input Voltage
Input Voltage
Vin *
Vin **
35
V
V
40
Power Dissipation
TO-220
Without heatsink
Pt ***
2
15
TO-220
ITO-220
W
Without heatsink
TJ
10
Operating Junction Temperature Range
Storage Temperature Range
0 ~ +125
-65 ~ +150
oC
oC
TSTG
Note : * TS7805B to TS781B
** TS7824B
*** Follow the derating curve
TS7800B series
1-1
2005/01 rev. A