1
Optoway
TRSL-3130WG
***********************************************************************************************************************************************************************
TRSL-3130WG / TRSL-3130AWG
3.3V / 1310 nm / 155 Mbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-3 IR-1 / SDH STM-1 (S-1.1) Compliant
l Small Form Factor, RJ-45 size, 2X10 pin Package
l 1310 nm LD Transmitter
The TRSL-3130WG series single mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-3 IR-1 / SDH STM-1 (S-1.1) and Fast Ethernet.
This module is designed for single mode fiber and operates
at a nominal wavelength of 1310 nm. A guaranteed
minimum optical link budget of 19 dB is offered which can
correspond to a link distance of over 30 km. The transmitter
section uses a multiple quantum well laser and is a class 1
laser compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry.
l 19 dB Link Power Budget at Least
l Distance up to 30 km
l Analog Monitor Function
-- Transmitter Laser Bias Current
-- Transmitter Laser Optical Power Monitor
-- Receiver Photo Detector Current
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70oC Operating: TRSL-3130WG
l -40 to 85oC Operating: TRSL-3130AWG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l ATM 155 Mbps Links
l SONET/SDH Equipment Interconnect
l Fast Ethernet 100 Mb/s Links
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SDH
/SONET
Distance Wavelength Package
Temp. TX Power RX Sens.
RoHS
(km)
30
30
(nm)
1310
1310
(oC)
(dBm)
(dBm) Compliant
TRSL-3130WG
TRSL-3130AWG
125 / 155 IR-1/S-1.1
125 / 155 IR-1/S-1.1
2X10 LC 0 to 70
2X10 LC -40 to 85 -8 to -15
-8 to -15
-34
-34
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Min
-40
0
Max
85
Units
oC
oC
Notes
Storage Temperature
Operating Temperature
Topr
70
TRSL-3130WG
-40
85
TRSL-3130AWG
10 seconds on leads only
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
Vcc
oC
V
0
GND
0
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Min
Typ
Max
Units / Notes
Vcc
Topr
3.13
0
-40
3.3
3.47
70
85
V
oC / TRSL-3130WG
oC / TRSL-3130AWG
Mb/s
Data Rate
Power Supply Current
125 / 155
200
200
280
Icc
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0