1
Optoway
TRS-7250G
***********************************************************************************************************************************************************************
TRS-7250G / TRS-7250TG / TRS-7250FG / TRS-7250CG / TRS-7250CTG / TRS-7250CFG
5V / 1550 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-7250G
l Duplex ST Single Mode Transceiver: TRS-7250TG
l Duplex FC Single Mode Transceiver: TRS-7250FG
l Compliant with IEEE-802.3z Gigabit Ethernet
l 1550 DFB LD Transmitter
The TRS-7250G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such Gigabit Ethernet and
Fibre Channel. This module is designed for single mode
fiber and operates at a nominal wavelength of 1550 nm. A
guaranteed minimum optical link budget of 19 dB is offered
which can correspond to a link distance of over 50 km
(assuming worst case fiber loss of 0.3 dB/km). The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC 60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
l 19 dB Power Budget At Least
l Industry Standard 1 x 9 Footprint
l Single +5 V Power Supply
l RoHS Compliant
l 0 to 70oC Operating
l PECL Signal Detect Output: TRS-7250G
l TTL Signal Detect Output: TRS-7250CG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l High Performance Desktops
ORDER INFORMATION
P/No.
Bit Rate 1000 Distance Wavelength Voltage
Package
Temp.
(oC)
TX
RX Sens.
(dBm)
RoHS
Compliant
(Mb/s) BASE
(km)
(nm)
(V)
Power
(dBm)
0 to -5
TRS-7250G
1250 XD
50
1550 DFB
5
1X9 SC/ST/FC 0 to 70
-24
Y
Note: TRS-XXXXXF for FC duplex transceiver, TRS-XXXXXT for ST duplex transceiver, TRS-XXXXX-EM for SC duplex transceiver
with extended EMI shielding, TRS-XXXXXCX for transceiver with TTL signal detection output.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Symbol
Tstg
Topr
---
Vcc
---
Min
-40
-5
Max
85
Units
oC
Notes
70
oC
260
6
oC
V
10 seconds on leads only
0
GND
0
Vcc
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Symbol
Min
4.75
0
Typ
Max
5.25
70
Units
Vcc
5
V
oC / air flow 1m/sec
Mb/s
Topr
1250
180
1300
280
Power Supply Current
Icc
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2005 V3.0