1
Optoway
TRML-9100FG
***********************************************************************************************************************************************************************
TRML-9100FG / TRML-9100FAG
3.3V / 850 nm / 2.5 Gbps RoHS Compliant SFF LC MULTI-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Multi-Mode Transceiver
l Compliant with Fibre Channel FC-PH-2 for
200-M5-SN-1 and 200-M6-SN-1
The TRML-9100FG series multi-mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
Fibre Channel FC-PH-2 for 200-M5-SN-1 and
200-M6-SN-1 and Gigabit Ethernet IEEE 802.3z
1000BASE-SX. This module is designed for multi-mode
fiber and operates at a nominal wavelength of 850 nm. The
transmitter section uses a multiple quantum well 850 nm
VCSEL and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated GaAs detector preamplifier (IDP)
mounted in an optical header and a limiting post-amplifier
IC. A PECL logic interface simplifies interface to external
circuitry.
l Compliant with IEEE 802.3z 1000BASE-SX
l Link Distance at 2.125 Gbd
150 m links with 62.5/125 mm MMF Cables
300 m links with 50/125 mm MMF Cables
l Link Distance at 1.026 Gbd
300 m links with 62.5/125 mm MMF Cables
500 m links with 50/125 mm MMF Cables
l Small Form Factor, RJ-45 size, 2X5 pin Package
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l RoHS Compliant
LASER SAFETY
l 0 to 70oC Operating: TRML-9100FG
l -20 to 85oC Operating: TRML-9100FAG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l SONET/SDH Equipment Interconnect
l Gigabit Ethernet 1.25 Gb/s Links
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
Distance Wavelength
Package
Temp.
(oC)
TX Power RX Sens.
RoHS
Compliant
Yes
(m)
(nm)
(dBm)
(dBm)
TRML-9100FG
TRML-9100FAG 2.125/1.063 200/100 150/300*
2.125/1.063 200/100 150/300*
850
850
2X5 LC
2X5 LC
0 to 70
-20 to 85
-4 to -9
-4 to -9
-15
-15
Yes
Note: 150 m links with 62.5/125 mm MMF Cables and 300 m links with 62.5/125 mm MMF Cables.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Min
-40
0
Max
85
Units
oC
oC
Notes
Topr
70
TRML-9100FG
-20
85
TRML-9100FAG
10 seconds on leads only
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
Vcc
oC
V
0
GND
V
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Min
3.13
0
-20
1
Typ
Max
3.47
70
Units / Notes
Vcc
3.3
V
oC / TRML-9100FG
oC / TRML-9100FAG
Gb/s
Topr
85
Data Rate
2.125
180
Power Supply Current
Icc
240
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0